Product features Technical data • Tapping point for wall mounting Type Inlet pressure P1 • For gas supply from top or bottom • For non-corrosive industrial Gase • Tested for use with oxygen • Single-stage type with hight control accuracy • Outlet pressure limitation by special adjustment • Central filter in the pressure regulator • Safety pressure gauge acc. to DIN EN 562 • Compact design • Light weight Outlet pressure P2 Materials Body and bonnet: Diaphragm: Valve cone: In- / outlets Inlet valve: single-stage max. 40 bar max. 1,5 bar (acetylene) 1,5 - 20 bar brass EPDM EPDM G 1/2” + soldering- or welding stub Outlet NFG, O2: G 1/4” + gland 6 mm FG, C2H2, Flux: G 3/8”LH + gland 9 mm Temperature range -30°C to +60°C -3 Leak rate <10 mbar l/s He Weight single: approx. 2,2 kg double: approx. 4,3 kg tripple: approx. 6,5 kg Flow rates pressure regulator ET2000: For other gas types the flow rate must be multiplied with these factors: flow rate [m3/h] at outlet pressure P2 [bar] acetylene inlet press. P1 oxygen nitrogen hydrogen argon carbon dioxide helium flow rate [m3/h] at outlet press. P2 [bar] Data sheet DES ET2000V Edition 0511 Subject to alteration without prior notice © Spectron Gas Control Systems GmbH Spectron Gas Control Systems GmbH Fritz-Klatte-Str. 8, D-65933 Frankfurt Tel.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 [email protected] www.spectron.de

Tapping point ET2000V Dimensions and part numbers Pressure regulators: see data sheets Tapping point pressure regulator ET2000 Tapping point pressure regulator with flow indication ET2000 Flow Bracket and lock nut for part number 666.12340 718.34311 718.34312 1 valve 2 valves 3 valves Shut off valve (inlet G 1/2” RH male) gas type part number oxygen + non flammable gases G 3/8” RH acetylene G 3/8” LH fuel gas G 3/8” LH The valve can be mounted upside down, pos. if the gas supply comes 5 from top. 5 5 Connections for valve inlet G 1/2” pipe Ø 12 x 1 copper 15 x 1 copper 14 x 2 steel soldering...