MiniVisc 3000 Series PORTABLE KINEMATIC VISCOMETERS Solvent-free, simple to use, fast and accurate results Applications include: ■ Machine Condition Monitoring – Increase availability of critical equipment by monitoring viscosity changes due to oil degradation and contamination. Avoid inadequate lubrication which causes adhesive wear in machinery and is a principal cause of equipment downtime. ■ Quality Control for Fuel/Oil Production and Blending Inspection Quality Control High accuracy 40C kinematic viscosity measurements for new and in-service oils Lab-quality results when and where you need them Accuracy +/- 3% Relative Standard Deviation to NIST viscosity standards. Solvent-free operation Fewer consumables, lower disposal costs and less environmental impact. Easy cleaning with the patented split-cell design – just wipe off the surfaces with a nonabrasive cleaning pad between samples. Requires only a few drops of oil to test Obtain samples without impacting lubricant level; only a few drops (60 μL) of oil required. A positive displacement pipette is provided for the most precise, repeatable measurements. Test even dark and sooty samples Innovative design allows testing of virtually any sample including dark and sooty or transparent samples without any pre-checks. Portable, battery-powered design Fits easily into a toolbox or carrying bag and capable of operation for over six hours before recharge. Expanded I/O capability Import sample lists and export measurement results via ViscTrack or AMS Oilview software. ASTM compliance ASTM D8092 “Standard Test Method for Field Determination of Kinematic Viscosity Using a Microchannel Viscometer.” MiniVisc 3000 Series viscometers use a patented split cell design that enables measurement of kinematic viscosity using only a few drops (60 µl) of oil. When closed, the center pieces of the split cell form a funnel with a 100 micron gap allowing oil to flow down by gravity. Sensors along the funnel are triggered when oil flows by and flow time between two sensors is measured. The kinematic viscosity is then calculated. When opened, the split cell can be easily cleaned with a non-abrasive cleaning pad and it is ready for the next sample. The split cell is controlled at 40°C throughout th

AMETEK Spectro Scientific | One Executive Drive, Suite 101, Chelmsford, MA 01824-2563 978-431-1 120 | www.spectrosci.com | [email protected] | An ISO 9001:2015 company Copyright © 2018 Spectro Scientific. All rights reserved. While every effort is made to assure the information in this document is accurate, Spectro Scientific does not accept liability for any errors or mistakes that may arise. Specifications are subject to change without notice. MiniVisc3000Series_DSv3_2019-1-29