LaserNet 200 Series PARTICLE COUNTER, FERROUS MONITOR, WEAR CLASSIFIER The LaserNet 200 Series allows reliability professionals to quickly and easily assess machinery health in just minutes. By testing only a few milliliters of fluid, users see a complete picture of machine wear and particulate contamination. The system offers: ■ Direct imaging laser technology per ASTM D7596 ■ Ferrous debris monitoring per The LaserNet 200 Series is a contamination and wear debris system designed for lubricant condition monitoring for predictive maintenance. F E AT U R E S I N ClU D E : Particle count, size distribution and codes (ISO 4406, NAS 1638, NAVAIR 01-1A-17, SAE AS 4059, GOST, ASTM D6786, HAL and user-defined bins) Ferrous content measurement in the sample with ferrous particle count and size distribution Differentiation of large ferrous particles >25 micron from total ferrous particles. Reporting percentage of large ferrous particles and ferrous wear severity index for easy trending and interpretation of the ferrous measurements. Patent pending. Classification of wear particles, image storage and reporting of particle count and size for Cutting, Sliding, Fatigue, Fibers and Non-metallic wear types Multiple configurations and options cover the needs of commercial laboratories and industrial plants for contamination control and predictive maintenance. LaserNet Comparison Total particle count & codes Non-metallic particles (sand/dirt) Free water measurement Air bubble/water droplet correction Wear particle classification Total ferrous concentration Ferrous particle count & size distribution Large ferrous concentration Autosampler option Ferrous Monitor to measure ferrous content – enables measurement of both ferrous content and total particle count on the same sample, eliminating the need to measure ferrous content on another instrument Classification of wear particle shape – directly images wear particle silhouettes and counts and classifies wear particles over 20 microns Autosampler for high throughput sample processing – provides automated, unatte

Particle Counter, Ferrous Monitor, and Wear Classifier The LaserNet 200 Series provides particle counts and codes, ferrous wear monitoring, and large wear particle classification. CUTTING WEAR Ferrous wear measurement is a critical requirement for monitoring machine condition. The high sensitivity in line magnetometer measures and reports ferrous content in ppm, and provides ferrous particle count and size distribution for large ferrous particles >25 μm. SLIDING WEAR FATIGUE WEAR Ferrous Monitor to measure ferrous content Measurement of both ferrous content and total particle count on the same...

Sample preparation Sample preparation is efficient with the LaserNet 200 Series – viscosities up to 320cSt can be processed without dilution due to the wide dynamic range. And, unlike conventional light blockage particle counters, there are no flow control valve adjustments needed when testing different sample viscosities. With an intuitive, configurable graphical user interface and no calibration required, the LaserNet 200 Series is fast, accurate and easy to use. ASP Autosampler The ASP autosampler is a low cost solution for automatic and unattended processing of a batch of up to 24 samples....

LaserNet 200 Series Product Information PART NUMBER LaserNet 210 particle counter. Requires SA1023 or SA1024 accessory kit and a PC. Standard Analytical Range LaserNet 215 particle counter with ferrous monitor. Requires SA1025 or SA1026 accessory kit and a PC. Not required. Validation standards supplied with instrument. LaserNet 220 particle counter with wear particle shape classifier. Requires SA1023 or SA1024 accessory kit and a PC. OPERATIONAL SPECIFICATIONS LaserNet 230 particle counter, wear particle classifier, and ferrous monitor. Requires SA1025 or SA1026 accessory kit and a PC. Sample...