FluidScan® 1000
1 / 4Pages

FluidScan® 1000 Series PORTABLE FLUID CONDITION MONITOR Handheld, Solvent-free, Immediate Results The FluidScan 1000 Series provides quantitative measurement of a lubricant's condition and plays an important role in predictive maintenance. Using the device, you can eliminate unnecessary oil changes or service by testing not just servicing the oil. Applications include: • Mineral and synthetic oils used in gear boxes, engines, transmissions • Hydraulic systems, turbines and other machinery components • Biodiesel/Fuel • Quality assurance of new oils Dedicated Direct Infrared Spectrometer No moving parts, designed for handheld and field use applications Multivariate calibration with unique oil-specific algorithms Easy to use Needs just one drop of oil and one minute to test No solvents required to clean Color-coded, user adjustable alarm limits Determine when in service oil is not fit for use Direct immediate measurement of water, TAN and oxidation for lubricants used in gearboxes, turbines and hydraulic systems Also measures TBN, water, glycol, soot, additive depletion and oxidation for engine oil Highly repeatable and reproducible results ASTM D7889 Compliant - "Standard Test Method for Field Determination of In-service Fluid Properties Using IR Spectroscopy" Excellent correlation to KF water, TAN and TBN laboratory tests Reproducibility and repeatability comparable to benchtop FTIR method ASTM E2412 Data analysis compliant to ASTM E1655 Comprehensive Fluid Library and Application Categories Over 850 fluids for immediate operation Full application library based on equipment use Innovative water and fluid identity methods Patented total water algorithm for both dissolved and free water Solvent free alternative to Karl Fischer titration Water index for grease condition monitoring Fluid integrity to determine fluid mix ups Water = Dissolved Water << [_ 1 Discard 1 Save

Patented flip top cell for accurate, easy sampling Innovation in hardware and calibration Multivariate Calibrations The FluidScan® classifies fluids into groups called families based on their chemical makeup, usage and spectral signature. The spectrum of all fluids in each family changes in a similar way with a given amount of degradation or contamination. Family-specific algorithms are assigned that accurately quantify these amounts. These algorithms yield quantitative results for the most critical properties of the most common oil types. Multivariate calibrations are applied so that...

OIL PROPERTY FLUIDSCAN IR IR ASTM REPEATABILITY REPEATABILITY APPLICATION CATEGORIES PROPERTIES MEASURED BY FLUIDSCAN Transmission Water (ppm), Oxidation (Abs/0.1mm), Fluid Integrity (unit) Hydraulic - Fire resistant Water (ppm), TAN (mg KOH/g) (Phosphate Ester) Hydraulic - Aerospace Water (ppm), Oxidation (Abs/0.1mm), Alien Fluid mineral based (Synthetic Hydraulic Fluid) (MIL-H-2304) (%), and Alien Fluid engine oil (MIL-H-23699) (%) Heat Transfer (Quenching Oil) Water (ppm), Oxidation (Abs/0.1mm) Industrial Water (ppm), Oxidation (Abs/0.1mm), TAN (mg KOH/g) (Steam and CCGT Turbine,...

FluidScan can also be ordered as part of a MiniLab system with the TruVu 360 data management platform. AMETEK Spectro Scientific | One Executive Drive, Suite 101, Chelmsford, MA 01824-2563 978-431-1 120 | www.spectrosci.com | sales.spectrosci@ametek.com | An ISO 9001:201 5 company Copyright © 2018 Spectro Scientific. All rights reserved. While every effort is made to assure the information in this document is accurate, Spectro Scientific does not accept liability for any errors or mistakes that may arise. Specifications are subject to change without notice. FluidScan Series_DSv5_2019-09-17