FDM 6000 Series PORTABLE FUEL DILUTION METER Solvent-free, simple to use, fast and accurate results The Need for Fuel Dilution Measurement If left unchecked, fuel dilution in lube oil causes serious engine damage. In diesel engine crankcases, fuel dilution can be caused by: ■ Excessive idling ■ Defective injectors ■ Loose connections ■ Intercooler leakage (aircraft hydraulic systems) Therefore fuel dilution is a common test item for both on site and off site in-service engine oil analysis. FDM 6000 Series is a portable fuel dilution meter that measures direct fuel dilution in engine oil. Lab quality results where and when you need them 0.2 to 15% fuel dilution measurement range. Excellent repeatability (≤5% RSD). Disposable FDM vials eliminat e carryover contamination. Onboard memory allows use of up to three stored calibration profiles. Sample ID entry and data file export via USB cable. Battery powered, lightweight, optional hard case for transit. Complies to ASTM D8004. Fast and easy to use Small volume – 0.5 ml of sample required. No solvent needed for cleaning. Less than one minute test time. Direct reading of fuel dilution percentage. Easy touch screen interface with voice guidance. PATENTED FDM SAMPLING SYSTEM PURGE PUMP AMBIENT AIR SAW SENSOR ARRAY DISPOSABLE OIL SAMPLE CONTAINER SAMPLE PUMP Innovative design The FDM analyzer employ a Surface Acoustic Wave (SAW) vapor sensor to measure the concentration of fuel in used oil samples by sampling the “headspace” in the vial. The device assumes (based on Henry’s Law) that the fuel concentration in the headspace vapor is directly related to the fuel present in the oil sample. The surface of the SAW sensor has a polymer coating with specific solubility to fuel vapors. The sample pump draws the headspace vapor through the SAW sensor where it is absorbed onto the polymer coating and detected. The purge pump then pushes air through the SAW to clean the system so it is ready for t

FDM 6000 Series Product Information Both the FDM 6000 and 6001 include the base fuel dilution meter, soft tip stylus, battery charger, USB cable, CD manual, FDM vials and disposable pipettes for 100 samples. PART NUMBER Stored Calibration MECHANICAL SPECIFICATIONS FDM 6001 Fuel Dilution Meter System – Multiple Calibration. Requires SA1019 Standard Accessory Kit. FDM 6000 Fuel Dilution Meter System – Single Calibration. Requires SA1019 Standard Accessory Kit. Shipping Package Dimensions Shipping Package Weight PRODUCT INFORMATION Application Mineral and Synthetic Lubricants used in liquid fueled...