1. Catalogs
  2. Spectec
  3. 0158-Hall-effect-sensors

0158-Hall-effect-sensors

0158-Hall-effect-sensors

0158-Hall-effect-sensors

Product catalog summary
Product Description: SPECTEC’s Proximity/Zero Speed sensors are designed to operate in the presence of a low magnetic field. They offer bi-polar (standard), uni-polar, and bi-polar latching activation options. The standard output is NPN Supply Tracking 0-Vs, with a normally high output when no target is present. Intrinsically safe versions are available as per bulletins IS160 & IS161.
Specifications:
  • Orientation: Single sensors require no orientation, while dual sensors need alignment with the target's rotation.
  • Supply Voltage (Vs): 4.0 to 30 VDC, reverse polarity protected.
  • Signal Output (Vo): Normally high, except for PNP output which is normally low.
  • Operating Frequency: Standard up to ~20 kHz, high speed up to ~100 kHz.
  • Air Gap: Typically ≤ .160”, up to 1” with strong magnets.
  • Temperature Range: 2TE: -40° to 221°F, 3TE: -40° to 302°F.
  • Construction: 300 Series Stainless Steel housing and face, solid epoxy encapsulation.
  • Compliance: CE-compliant with EN55011, EN50082-2.
Options: Custom configurations, special materials, and temperature probes are available. Various connector and pin assignments are detailed, with gold-plated contacts.
Order Information: The document provides detailed ordering information, including style, options, threads, and sensor types. It specifies different configurations for housing length, lead wire length, and connector types.
Connector Pinouts: Detailed pinout configurations are provided for different connector types, including MS3, MC3, MS3B, B4, and MD4.
Notes: The document includes notes on output signal options and shielded cable connections.
See more

Catalog excerpts

0158-Hall-effect-sensors-1

0158 DIGISPEC PROXIMITY/ZERO SPEED H SENSOR SINGLE AND DUAL OUTPUT MAGNET ACTUATED PRODUCT DESCRIPTION SPECTEC’s Proximity/Zero Speed sensors are designed to switch in the presence of a low magnetic field. Bi-polar(north and south activation) is standard. Uni-polar (single pole activation) and Bi-polar latching (alternating pole activation) are also available. The standard output is NPN Supply Tracking 0-Vs, provided from a 3k Ohm internal pull-up resistor to a collector, which can sink 25 mA. The output is normally high with no target present. Other output signal options are available; please see Page 2 for details. For intrinsically safe versions refer to bulletins: IS160 & IS161. SPECIFICATIONS Orientation: 0158MD Single: No orientation required. Dual: For directional applications, the alignment mark must be in line with the rotation of the target. For synchronous output, the alignment mark should be at a right angle to the rotation of the target. 4.0 to 30 VDC at 18 mA Reverse Polarity Protected Output signal is typically ‘Normally High’, Except for PNP output which is ‘Normally Low’ Operating Freq.: Standard: 0 to ~20 kHz (for precision position applications) High Speed: 0 to ~100 kHz (for high speed only) .160” Typically  1” using extra strong 5K Gauss mags Temperature Range: *May be reduced based on configuration *May be reduced based on configuration 300 Series S.S. Housing & Face Solid Epoxy Encapsulation See Page 2 All have Gold Plated Contacts Lead Wires & Assignments: See Page 2 for Configurations 2TE: PVC 22-24 AWG (105°C) 3TE: TFE 22 AWG (150°C) Red: Supply (+) Black: Common (-) White/Green: Signal Bare: Cable Shielding Custom configurations, special materials of construction, temperature probes (NTC10, RTD100, or others) are also available positioned near the face or the sensor. 5-1-2017, REV. 9

 Open the catalog to page 1
0158-Hall-effect-sensors-2

ORDER INFORMATION STYLE: Temperature Range: Connector Pinouts Sensor Type: 1 - 0 – Vs, NPN w/ 3.1k Ohm pull-up [Normally High] 2 - 0 – Vs, NPN, OC(Open Collector) [Normally High] 3 - 0 – Vs, PNP, OC [Normally Low] 5 - 0 – 5V, NPN [TTL] [Normally High] 1 - Hs, Uni-Polar (South Pole Activated) 2 - H, Bi-Polar 4 - Ho, Omni-Polar Type 6 - HHs, Dual Uni-Polar (South Pole Activated) 7 - Hcs, Uni-Polar High Speed Type (South Pole Activated) 8 - Hc, Bi-Polar Latch High Speed Type 9 - Hco, Omni-Polar High Speed Type MS3106-10SL-3P (see Bulletin 3000) Micro-C (see Bulletin 3004) MS3102-10SL-3P (see Bulletin...

 Open the catalog to page 2

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.