0090 • 0091 DIGISPEC MAGNETIC SPEED SENSOR 5/8, M16 PRODUCT DESCRIPTION SPECTEC’s DIGISPEC Magnetic pickups produce a digital frequency output proportional to speed. The internal amplifier provides for constant pulse shaping, signal amplitude, logic-level output, robust signal-to-noise ratio, usable at lower RPMs and greater air gap between the sensor and the actuator. All models are also available with an internal temperature probe (RTD100 Ohm, NTC 10k Ohm). For hazardous location Class 1 Division 1 please refer to IS90/91, or for Class 1 Division 2 please refer to N90/91. Shown with FP pole Input Sensitivity: Operating Freq.:  3 to 10 kHz  30 kHz at increased signal level, varies with target size, distance and pickup sensitivity. (Options: 100 kHz) Rise/Fall Time: Temperature Range: Pole Piece: Flush(FP), Sealed Flush(FPS), Extended(EP) ,Sealed Extended(EPS), & Chisel Point(CP) Poles are available. (CP must be oriented parallel with gear tooth.) Gear Pitch Pole Type 36 DP (MODULE 0.7) EP62, CP10 26 DP (MODULE 0.98) EP93 FP130, FPS130, 24 DP (MODULE 1.06) EP106, EPS106 EP125, CP45 12 DP (MODULE 2.11) EP188 5 DP (MODULE 5.1) EP250 See Page 2 for Wire & Cable Options Red: Supply (+) Black: Common (-) Green/White: Signal Bare: Cable Shielding See page 2 for Configurations All have gold plated contacts Lead Wire Assignments: 300 Series stainless steel housing Solid epoxy encapsulation OPTIONS Custom configurations, thread sizes, special materials, temperature probes (NTC10, RTD100, or others), Please contact sales. 5/14/2

ORDER INFORMATION STYLE: 0090 0090M 0090M1 Thread Length(A): Vo, Pulse Out/ Output Logic: Input Sensitivity and Temp.: Connector: Flush Pole, Ø.130” Extended Pole, Ø.106” x .02” H Extended Pole, Ø.187” x .02” H Extended Pole, Ø.125” x .07” H Flush Pole, Ø.130” in Sealed S.S. Face Extended Pole, Ø.106” x .02” H in Sealed S.S. Face Sanitary NEMA 6, IP65, & IP67 Construction w/ FPS130 Fine Chisel Pole, .01” W Course Chisel Pole, .01” W Extended Pole, Ø.062” x .03” H Extended Pole, Ø.093” x .03” H Extended Pole, Ø.250” x .02” H MS3106-10SL-3P (See Bulletin 3000) Micro-C (See Bulletin 3004) MS3102-10SL-3P...