Catalogs >
Specac Ltd >
Pellet Dies

Pellet Dies
3Pages

Catalog excerpts

sample Prep I Atlas™ Evacuable Pellet Dies quality sample pellets from 5mm Specac offers wide range of high-quality Evacuable Pellet Dies suitable for producing discs and briquettes from powdered samples. These are well suited for the preparation of KBr pellets used in FT-IR spectroscopic analysis and XRF pellets for X-Ray Fluorescence atomic spectroscopic analysis, but can also be used for a broad range of other applicaions. These Pellet Dies are compatible with all the Specac Atlas™ Presses. As standard the Specac Pellet Die's produce circular pellets in sizes from 5mm to 40mm diameter, but other shapes and sizes are available upon request. All the parts of the die are manufactured from hardened stainless steel, for optimum quality and durability, and highly polished surfaces for contact with the sample. The Evacuable Pellet Die is made up of an evacuable base, body, plunger, pair of internal pellet pressing surfaces, extractor ring and O ring kit. Removal of any moisture, if required, is done using the evacuation port. • Hardened Stainless Steel • Highly polished pellets • Evacuable for sample pellet clarity and quality • Vacuum pump kit for moisture free pressing (Optional) Ordering Information These dies are made from 440C hardened stainless steel and all of the dies are equiped with nitrile o-ring seals and an evacuation port for removal of moisture if desired during the pressing process. bringing technology to life

Open the catalog to page 1

sample Prep I Atlas™ Evacuable Pellet Dies Evacuable Pellet Dies Options Pellet Holder * These pellet holders are sample retaining rings only and do not have a rectangular mounting plate. GS03600 Agate Pestle and Mortar GS03475 Ultra Micro frames for 13mm die C = Stainless Steel Pellet Height A+B+C+D = Total Height of Die bringing technology to life

Open the catalog to page 2

sample Prep ■ Atlas™ Lightweight Dies Specifically designed to work with the range of Atlas™ The Atlas™ Lightweight Evacuable Pellet Dies have been specifically designed to work with the range of Atlas™ automatic presses up to a maximum load rating of 25 tons. The dies are also compatible for use with Specac's 15 and 25 ton manual hydraulic presses. The dies are made out of 440C stainless steel and offered to prepare pellet discs of 32mm (GS25410) or 40mm They are well suited for the preparation of soild pellets for study by X-Ray Fluorescence spectroscopy. When many samples are to be...

Open the catalog to page 3

Pellet Dies 3Pages

Catalog excerpts

All Specac Ltd catalogs and technical brochures

Pellet Dies
3Pages