Catalog excerpts
Product Datasheet Heatable Transmission Cells (Static and Flow) Heatable transmission cells for both solid and liquid sampling. The liquid cells can be specified for both static and flowing sample conditions. The cells may be used in conjunction with a 3”x2” slide mounted holder or fitted to any of Specac’s advanced transmission cell holders. Compatible Cell Holders Heatable Liquids Cells y Designed to be heated or cooled Stainless-steel cells suitable for heating/cooling from 250 to -70 °C. An additional measuring thermocouple (not included) can be fitted if required. Flow or Static Static cells are supplied with a Luer fitting for easy sample injection. Flow cells are fitted with 1/16” Swagelok connections for use with sample pumping systems. Extensive selection of window materials Our range of windows cover spectral ranges from the UV, to near- and mid-IR. Demountable windows The windows and spacers are removable for cleaning or replacement Variable Temperature (VT) Cell (GS21525) Vacuum-jacketed cooling chamber for analysis at temperatures as low as -190 °C, with electric heating for analysis up to 250 °C. Electrical Heating Jacket (GS20730) Heated cell holder for analysis from ambient temperature up to 250 °C. Water Heating Jacket (GS20710) Heated cell holder for analysis from ambient temperature up to 90 °C using a circulating fluid for heating. Ambient Cell Holder (GS20740) Basic 3”x2” inch cell mount for the heatable cell range. Heatable Solids Cells Liquid Cell Volume Guide y Designed to be heated or cooled Stainless-steel cells suitable for heating/cooling from 250 to -190 °C. An additional measuring thermocouple (not included) can be fitted if required. Variable aperture size Sample diameters from 12 to 30 mm, up to 8 mm thick. Electrical Heating Jacket: 12 to 28 mm diameter, up to 3 mm thick Approximate cell volume for given spacer: 0.006 mm: 1.60 μl
Open the catalog to page 1
Product Datasheet Ordering Information Heatable Liquids Transmission Cell 1. Select Cell Configuration: Flow Condition Fittings Luer Adaptor 2. Check Holder Compatibility: 1/16 inch Pipe with 1/16 inch Swagelok Swagelok Union Fitting Electrical Heating Jacket (GS20730) Water Heating Jacket (GS20710) Ambient Cell Holder (GS20740) 3. Choose Window and Select Part Number: NaCl GS20510 Notes: * Requires flow tubes (GS20080) for use with the VT cell. Pathlength (mm) 0.006, 0.012, and 0.025 mm spacers are made from Mylar. All others are made from PTFE. Heatable Solid Transmission Cell Ambient...
Open the catalog to page 2All Specac Ltd catalogs and technical brochures
-
APEX 400 Hydraulic Press1 Pages
-
Golden Gate® diamond ATR2 Pages
-
Gas cell for pathlength1 Pages
-
Benchmark1 Pages
-
Atlas Heated Platens1 Pages
-
Atlas Evacuable Pellet Dies3 Pages
-
PEarl2 Pages
-
ProCell - Process Flow Cells16 Pages
-
25 Reflection ATR1 Pages
-
Product Catalogue 2018-19156 Pages
-
Rotator Mounts2 Pages
-
Basic Solid Pack2 Pages
-
Liquid Pack3 Pages
-
FTIR Starter Kits2 Pages
-
Quest ATR2 Pages
-
Specacabinet2 Pages
-
Specamill1 Pages
-
Heated Platens1 Pages
-
Mini-Film Maker Kit2 Pages
-
Pellet Dies3 Pages
-
Window Polishing Kit1 Pages
-
Omni Cell System3 Pages
-
Water Heating Jacket1 Pages
-
Electrical Heating Jacket1 Pages
-
Long Pathlength Gas Cell4 Pages
-
Short Pathlength Gas Cell2 Pages
-
Diamond Compression Cell2 Pages
-
Magnetic Film Holder2 Pages
-
Mini-Pellet Press2 Pages
-
Atlas Autotouch Press2 Pages
-
Atlas Power Press2 Pages
-
Manual Presses1 Pages
-
Specadie1 Pages
