Catalogs >
Specac Ltd >
Constant Thickness Film Maker Accessory

Constant Thickness Film Maker Accessory
2Pages

Catalog excerpts

Constant Thickness Film Maker Accessory - 1

sample Prep I Constant Thickness Film Maker The Constant Thickness Film Maker System permits precision thin film of reproducible Designed to reduce sample preparation time and provide high sample throughput for routine analytical work as well as a convenient method for preparing small polymer samples for transmission or reflectance spectroscopy. The High Temperature Film Maker is designed with integral heating and cooling systems and operates to a maximum temperature of400°C. The standard unit which comes with independant cooling system is used with separate, optional, heated platens and has a maximum operating Both systems are designed for use in all Specac Atlas hydraulic presses but can be used with most laboratory Film thicknesses can be changed by selection of different microns) which are fitted between two optically polished platens - samples are pressed onto a non-stick aluminum foil backing material, while excess sample runs into a trough so that thickness is not affected. The sample is then cooled before removal and analysis. Total preparation time is around 10 to 15 minutes, • Reproducible film thicknesses • Quantitative/qualitative applications High Temperature Constant Thickness Film Maker Illustrations, descriptions and specifications in this datasheet were correct at the time of going to press. However, Specac's policy is one of continuous product development and we reserve the right to change descriptions and specifications at any time. For the latest details please contact your local Specac office or smiths www.specac.com bringing technology to life

Open the catalog to page 1

Constant Thickness Film Maker Accessory - 2

sample Prep I Constant Thickness Film Maker Ordering Information Film Maker Systems GS15640 Standard Constant Thickness Film Maker GS15627 and 500 micron spacer rings, sample cooling system, GS15621 aluminum foil backing discs (200) and Specacard GS15800 High Temperature Constant Thickness Film Maker GS15629 Includes: Fully integrated film maker with 15, 25, 50, 100, 250 and 500 micron spacer rings, heating and cooling GS15805 system with digital temperature controller, aluminum foil backing discs (200) and Specacard film holders Aluminum foils backing discs (200) Specacard sample holders,...

Open the catalog to page 2

Constant Thickness Film Maker Accessory 2Pages

Catalog excerpts

All Specac Ltd catalogs and technical brochures

Constant Thickness Film Maker Accessory
2Pages