Catalogs >
Specac Ltd >
Basic Solid Pack

Basic Solid Pack
2Pages

Catalog excerpts

Press Family I Mini-Pellet Press A cost effective hydraulic press solution for FTIR pellet The Specac Mini-Pellet Press is an innovative low cost solution for the pressing of 7mm KBr pellets. Designed for use on a laboratory bench top, this dedicated KBr pellet press enables the user to create consistently high quality KBr pellets for transmission FTIR analysis. Incorporating full hydraulic operation, the Mini-Pellet Press enables the user to apply the required load for sample preparation through the simple rotation of a load knob. An integrated pressure gauge enables the user to apply a reproducible load resulting in high quality KBr pellets suitable for quantitative studies. With a rugged and durable design and an innovative sealed hydraulic unit, the press is intended for daily laboratory use with maintenance-free operation. The dedicated 7mm diameter Pellet Die Assembly is shaped to securely locate onto the lower piston of the press and includes a pellet ring in which the sample pellet is held after pressing. Once the KBr pellet is pressed this pellet ring is simply placed onto the special sample compartment mount, locating the sample directly into the • Hydraulic operation enables all users to make high • Integrated pressure gauge ensures consistent pellet • Fast and simple process to get from sample to IR • Simple operation requires minimal training The press is designed to be used on a laboratory bench top, but is small in size and light enough in weight to allow it to be moved to different points of use or stored when not The Specac Mini-Pellet Press is offered as part of a Basic Solid Pack. This pack is equipped with a range of sample preparation components necessary for FTIR solid sample analysis by transmission, Including: the Mini-Pellet Press, a 7mm Pellet Die Assembly, 7mm Disc Holder for standard 3" by 2" mount, a pair of spare Pellet Ring Holders, a Pestle and Mortar, and KBr Powder (50g) Illustrations, descriptions and specifications in this datasheet were correct at the time of going to press. However, Specac's policy is one of continuous product development and we reserve the right to change descriptions and specifications at any time. For the latest details please contact your local Specac office or smiths www.specac.com bringing technology to life

Open the catalog to page 1

Press Family I Mini-Pellet Press Maximum Load 2 Tons Maximum space between pressing faces 50mm Minimum space between pressing faces 12mm Die Assembly Material hardend 440C stainless steel Upper pressing area (top lead screw diameter) 17.0mm Lower pressing area (piston diameter) 21.6mm Dimension (ex. lead scews) LxHxW 110x200x155mm Dimension (inc. lead screws) LxHxW 110x265x215mm Ordering Information Pellet preparation involves the use of a 7mm Pellet Die Assembly. 1) The sample material is blended with KBr (or other halide salt) powder and loaded into a pellet ring holder and anvil die...

Open the catalog to page 2

Basic Solid Pack 2Pages

Catalog excerpts

All Specac Ltd catalogs and technical brochures

Basic Solid Pack
2Pages