M960 Automatic Sheet Starter

Product catalog summary

Overview
The document describes the M-95 Autocutter and M-96 Automatic Sheet Starter, components of a high-volume punching and die-cutting system by Spartanics. These systems are designed to enhance productivity and accuracy in material handling and processing.

Specifications

M-95 Autocutter: Integrates with M-500 systems, handles full skids of material, optically registers and cuts material into strip stock, and feeds it into the punching system. It supports a maximum sheet size of 73 cm x 76 cm and a stack height of 45 cm, with a throughput of up to 20 strips per minute.
M-96 Automatic Sheet Starter: Works in conjunction with the Autocutter to deliver sheets into the punching system at high speeds.
M-73 Strip Starter: A cost-effective alternative that loads strips into the punching system, improving safety and efficiency. It supports a maximum sheet size of 104 cm x 41 cm and a stack height of 15 cm, with a throughput of up to 20 strips per minute.

Features and Benefits

Both systems offer complete automation, minimizing material handling and ensuring consistent accuracy.
They provide high-speed, high-output production with minimal downtime and easy job setups.
The M-73 Strip Starter enhances safety by eliminating manual handling and increasing production rates.

Technical Specifications

M-95 Autocutter: Machine dimensions are 254 cm x 102 cm x 165 cm, weighing approximately 227 kg. It requires 220-480 VAC power and 115 NI/min air at 5.5 bar.
M-73 Strip Starter: Machine dimensions are 102 cm x 28 cm x 76-107 cm, weighing 37 kg. It requires 120 VAC power and 0.031 NI/min air at 5.5 bar.

Contact Information
Spartanics, 3605 Edison Place, Rolling Meadows, IL USA 60008. Phone: 847-394-5700, Fax: 847-394-0409, Email: [email protected], Web: www.spartanics.com

Catalog excerpts

WHEN ACCURACY COUNTS... ■VjVjVJI ■■■COUNTONSPARTANICS THE MOST PRODUCTIVE PUNCHING & DIE CUTTING SYSTEM AVAILABLE mi s? I ^^^^^^ 5 AUTOCU M^tբtiUTpMATIC SHEET STARTER Beginning to EndHighVolumeThroughJ f1Spartanics"

Open the catalog to page 1

M-95 AUTOCUTTER M-96 AUTOMATIC SHEET STARTER Both the Autocutter & Automatic Sheet Starter were designed to further enhance the most productive punching and die cutting system avail-able. A stack of over 500 sheets can be automatically delivered into Spartanics' Punching System at press speeds of 150 strokes per minute, with scratch free handling. Both can be retrofitted to existing M-500 Punching & Die Cutting Systems. The Autocutter not only allows you to stack and deliver material into the press, but optically registers and cuts it into strip stock before feeding into the press. A photo of...

Open the catalog to page 2

All Spartanics catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list