M95 Autocutter

Product catalog summary

Overview
The document describes the M-95 Autocutter and M-96 Automatic Sheet Starter, components of a high-volume punching and die-cutting system by Spartanics. These systems are designed to enhance productivity and accuracy in material handling and processing.

M-95 Autocutter Features and Benefits

Fully integrated with M-500 Systems, capable of handling full skids of stacked material.
Optically registers and cuts material into strip stock before feeding into the punching system.
Supports high-speed production with minimal loading downtime and scratch-free handling.
Multilingual control panel and metric/inches convertibility for ease of use.

Technical Specifications

Maximum Sheet Size: 73 cm x 76 cm (29" x 30").
Minimum Sheet Size: 32 cm x 32 cm (12.75" x 12.75").
Stack Height: 45 cm (18") max, approximately 500 sheets.
Material Thickness: 0.03 cm - 0.09 cm (0.010" - 0.035").
Machine Dimensions: 254 cm x 102 cm x 165 cm (100" x 40" x 65").
Power: 220-480 VAC 50/60 Hz 600.

M-73 Strip Starter
The M-73 Strip Starter is a cost-effective alternative designed to load strips of material into the Spartanics Punching System, enhancing safety and efficiency.
Features and Benefits

Improves handling and safety by eliminating manual handling and minimizing manual labor.
Increases production rate by allowing continuous operation at optimal cycle rates.

Technical Specifications

Maximum Sheet Size: 104 cm x 41 cm (41" x 16").
Minimum Sheet Size: 31 cm x 1.9 cm (12" x 0.75").
Material Thickness: 0.02 cm - 0.25 cm (0.008" - 0.100").
Machine Dimensions: 102 cm x 28 cm x 76-107 cm (40" x 11" x 30-42").
Power: 120 VAC 50/60 Hz 250.

Contact Information
Spartanics, 3605 Edison Place, Rolling Meadows, IL USA 60008. Telephone: 847-394-5700, Fax: 847-394-0409, Email: [email protected], Web: www.spartanics.com

Catalog excerpts

WHEN ACCURACY COUNTS… THE MOST PRODUCTIVE PUNCHING & DIE CUTTING SYSTEM AVAILABLE M-95 AUTOCUTTER M-95 AUTOCUTTER M-96 AUTOMATIC SHEET STARTER M-96 AUTOMATIC SHEET STARTER Beginning to End High Volume Throughput

Open the catalog to page 1

M-95 AUTOCUTTER M-96 AUTOMATIC SHEET STARTER Both the Autocutter & Automatic Sheet Starter were designed to further enhance the most productive punching and die cutting system available. A stack of over 500 sheets can be automatically delivered into Spartanics’ Punching System at press speeds of 150 strokes per minute, with scratch free handling. Both can be retrofitted to existing M-500 Punching & Die Cutting Systems. The Autocutter not only allows you to stack and deliver material into the press, but optically registers and cuts it into strip stock before feeding into the press. A photo of...

Open the catalog to page 2

All Spartanics catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list