SPI700A8BB

SPI700A8BB

Product catalog summary
Input Characteristics
The power supply operates within an input range of 90 to 265Vac (RMS) and a frequency range of 47 to 63Hz. It has a maximum input current of 12A at 115Vac and 6A at 230Vac, with no damage from inrush current at cold start.

Specifications
  • Temperature: Operates between 0°C and +50°C at full load; storage and shipping temperatures range from -20°C to +80°C.
  • Humidity: Operates at 10-90% humidity, with storage at 95%.
  • Dielectric Withstand: 1800V AC for 1 second.
  • Efficiency: Minimum of 82%, typically up to 87%.
  • Rise Time: Less than 20ms.
  • Hold-up Time: Minimum of 17ms at nominal input voltage.
  • Power Good Signal: Power on delay time between 100 and 500ms, off delay of at least 1ms.
  • Leakage Current: Less than 3.5mA at 264Vac, 50Hz.
  • MTBF: 100,000 hours at maximum load and +25°C.
  • Dimensions: 140x150x86mm (5.5x5.9x3.4 inches).

Output Characteristics
The power supply provides various output voltages with specific load regulations and ripple & noise levels. Key outputs include +3.3V, +5V, and multiple +12V outputs, with a total power output of 700W. The combined current for 12V outputs should not exceed 56A.

Features
  • Complies with ATX12V standard and includes Active Power Factor Correction (PFC) meeting EN61000-3-2.
  • High efficiency and reliability, compliant with EU Directive 2002/95/EC (RoHS).
  • Includes remote ON/OFF function, internal 12V DC fan, and thermal fan speed control.
  • Provides protection against over voltage, short circuit, and over current.
  • 100% Hi-pot, ATE, and burn-in tested.
  • Complies with FCC part 15 subpart J class B and CISPR 22 class B standards.
  • Approved by CUL/UL60950-1 2nd, TUV EN60950-1 2nd, CB 60950-1 2nd report, FCC, and EMC.
See more

Catalog excerpts

SPI700A8BB-1

Sparkle Power Inc. A Leading Power Supply Manufacturer Web site: www.sparklepower.com SPI700A8BB (80PLUS, RoHS Compliant) 700 Watts ATX12V Switching Power Supply Features • Complied with ATX12V standard Active Power Factor Correction (PFC) meet EN61000-3-2 High efficiency and reliability Compatible with European Union Directive 2002/95/EC (Restriction on Hazardous Substances). Temperature Range: Operating: 0°C ~ +50°C on full load; storage & shipping: -20°C ~ +80°C Remote ON/OFF function Humidity: 10-90% on operating, 95% on storage Dielectric Withstand: Primary frame ground 1800V AC for Noise Killer (thermal fan speed control function) Efficiency: 82% minimum, typical up to 87% Output over voltage, short circuit, and over current protection Rise time: Less than 20ms 100% Hi-pot, ATE, and burn-in tested Hold-up Time: 17ms minimum at nominal input voltage Re-settable power shut down Power Good Signal: Power on delay time 100 ~ 500ms, off Complies with FCC part 15 subpart J class B 115Vac operation, Leakage Current: Less than 3.5mA at 264Vac, 50Hz MTBF: 100,000 hours on maximum load at +25°C and CISPR 22 class B at 230Vac operation • delay 1ms minimum (TTL and CMOS compatible) Input Characteristics Input Range: 90 ~ 265Vac (RMS), Full Range Input Frequency: 47 ~ 63Hz Input Current: Max 12A (RMS) @ 115Vac, 6A (RMS) @ 230Vac Inrush Current: No damage at cold start Output Characteristics Output Voltage +3.3V +5V +12V1 +12V2 +12V3 +12V4 -12V +5Vsb *+3.3V and +5V total output not exceed 170W * Total output for this subject power supply is 700W Sparkle Power Inc. Main Office 1000 Rock Avenue San Jose, CA 95131 TEL: 408-519-8888 FAX: 408-519-9999 E-MAIL: [email protected] *Maximum combined current for 12V outputs shall be 56A Sparkle Power Inc. Los Angeles Office 17071 Green Drive City of Industry, CA 91745 TEL: 626-839-7180 FAX: 626-839-3395

 Open the catalog to page 1

All Sparkle Power catalogs and technical brochures

  1. FSP2400-20FM

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.