*mydirectindustry

SPI600A8BMB

Product catalog summary

Input Characteristics
The power supply operates within an input range of 90 to 265Vac and a frequency range of 47 to 63Hz. It has a maximum input current of 8A at 115Vac and 4A at 230Vac, with no damage from inrush current.

Specifications
The operating temperature range is 0°C to +50°C, while storage and shipping temperatures range from -20°C to +80°C. It can operate at 85% humidity and store at 95% humidity. The dielectric withstand is 1800V AC for 1 second. The efficiency is at least 82%, with a rise time of less than 20ms and a hold-up time of 13ms minimum at nominal input voltage. The power good signal has a power-on delay time of 100 to 500ms and an off delay of 1ms minimum. Leakage current is less than 0.3mA at 264Vac, 63Hz. The MTBF is 100,000 hours at maximum load and +25°C. Dimensions are 165x150x86mm.

Output Characteristics
The power supply provides various output voltages with specific load regulations and ripple & noise levels. For example, +3.3V and +5V outputs have a maximum load of 24A with a ripple & noise of 50mV P-P.

Features
The power supply complies with the ATX12V standard and includes active power factor correction meeting EN61000-3-2. It is high efficiency, reliable, and RoHS compliant. It features remote ON/OFF functionality, an internal 12V DC fan, low noise and ripple, and protections against over voltage, short circuit, and over current. It is 100% Hi-pot, ATE, and burn-in tested, with re-settable power shutdown. It meets FCC Part 15 Subpart J, Class ‘B’ for 115 Vac operation and CISPR 22 Class ‘B’ for 230 Vac operation. It is approved by UL 60601, TUV 60601, FCC, EMC, CE, and CB REPORT (IEC 60601).

Contact Information
Main Office: 1000 Rock Avenue, San Jose, CA 95131, TEL: 408-519-8888, FAX: 408-519-9999, E-MAIL: [email protected]. Los Angeles Office: 17071 Green Drive, City of Industry, CA 91745, TEL: 626-839-7180, FAX: 626-839-3395.

Catalog excerpts

Sparkle Power Inc. A Leading Power Supply Manufacturer Web site: www.sparklepower.com U SPI600A8BMB (80PLUS BRONZE, RoHS Compliant) 600 Watts ATX12V, Medical Grade Power Supply Features Complied with ATX12V standard Active Power Factor Correction (PFC) meet EN61000-3-2 High efficiency and reliability Compatible with European Union Directive 2002/95/EC (Restriction on Hazardous Substances). Remote ON/OFF function Output over voltage, short circuit, and over current protection 100% Hi-pot, ATE, and burn-in tested Re-settable power shut down FCC Part 15 Subpart J, Class ‘B’ 115 Vac operation. CISPR 22 Dielectric Withstand: Primary frame ground 1800V AC for 1 second Rise time: Less than 20ms Hold-up Time:13ms minimum at nominal input voltage Temperature Range: Operating: 0°C ~ +50°C ; storage & Power Good Signal: Power on delay time 100 ~ 500ms, off delay 1ms minimum (TTL compatible) MTBF: 100,000 hours on maximum load at +25°C Input Range: 90 ~ 265Vac , Full Range Input Frequency: 47 ~ 63Hz Input Current: Max 8A @ 115Vac,4A @ 230Vac Inrush Current: No damage Leakage Current: Less than 0.3mA at 264Vac,63Hz REPORT(IEC 60601) Input Characteristics Sparkle Power Inc. Main Office 1000 Rock Avenue San Jose, CA 95131 TEL: 408-519-8888 FAX: 408-519-9999 E-MAIL: [email protected] The +3.3V and +5V total output shall not exceed 160W. Total Output for this subject power supply Sparkle Power Inc. Los Angeles Office 17071 Green Drive City of Industry, CA 91745 TEL: 626-839-7180 FAX: 626-839-3395

Open the catalog to page 1

SPI600A8BMB

SPI600A8BMB

Catalog excerpts

All Sparkle Power catalogs and technical brochures

Archived catalogs