*mydirectindustry

SPI600A8BB

1 / 1 PageView full catalog

SPI600A8BB

Product catalog summary

Input Characteristics

Input Range: 90 ~ 265Vac (RMS), Full Range Input
Frequency: 47 ~ 63Hz
Input Current: Max 12A (RMS) @ 115Vac, 6A (RMS) @ 230Vac
Inrush Current: No damage at cold start

Specification

Temperature Range: Operating: 0°C ~ +50°C on full load; Storage & Shipping: -20°C ~ +80°C
Humidity: 10-90% on operating, 95% on storage
Dielectric Withstand: Primary frame ground 1800V AC for 1 second
Efficiency: 82% minimum, typical up to 87%
Rise Time: Less than 20ms
Hold-up Time: 17ms minimum at nominal input voltage
Power Good Signal: Power on delay time 100 ~ 500ms, off delay 1ms minimum (TTL and CMOS compatible)
Leakage Current: Less than 3.5mA at 264Vac, 50Hz
MTBF: 100,000 hours on maximum load at +25°C
Dimensions: 140x150x86mm / 5.5x5.9x3.4inch

Output Characteristics

Output Voltage	Minimum Load	Normal Load	Maximum Load	Load Regulation	Ripple & Noise
+3.3V	0.3A	12A	25A	± 5%	50mV P-P
+5V	1.0A	15A	25A	± 5%	50mV P-P
+12V1	1.0A	8A	16A	± 5%	120mV P-P
+12V2	1.0A	8A	16A	± 5%	120mV P-P
+12V3	1.0A	8A	16A	± 5%	120mV P-P
+12V4	0.5A	8A	16A	± 5%	120mV P-P
-12V	0A	0.25A	0.5A	± 10%	120mV P-P
+5Vsb	0A	2.0A	4.0A	± 5%	50mV P-P

Total output for +3.3V and +5V should not exceed 150W
Maximum combined current for 12V outputs shall be 48A
Total output for this power supply is 600W

Features

Complies with ATX12V standard
Active Power Factor Correction (PFC) meets EN61000-3-2
High efficiency and reliability
Compatible with European Union Directive 2002/95/EC (Restriction on Hazardous Substances)
Remote ON/OFF function
Internal 12V DC fan included
Noise Killer (thermal fan speed control function)
Low noise and ripple
Output over voltage, short circuit, and over current protection
100% Hi-pot, ATE, and burn-in tested
Re-settable power shut down
Complies with FCC part 15 subpart J class B 115Vac operation, and CISPR 22 class B at 230Vac operation
Approved by CUL/UL60950-1 2nd TUV EN60950-1 2nd, CB 60950-1 2nd report, FCC, EMC

Catalog excerpts

Sparkle Power Inc. A Leading Power Supply Manufacturer Web site: www.sparklepower.com SPI600A8BB (80PLUS, RoHS Compliant) 600 Watts ATX12V Switching Power Supply Features Complied with ATX12V standard Active Power Factor Correction (PFC) meet EN61000-3-2 High efficiency and reliability Compatible with European Union Directive 2002/95/EC Temperature Range: Operating: 0°C ~ +50°C on full load; storage & shipping: -20°C ~ +80°C (Restriction on Hazardous Substances). Remote ON/OFF function Humidity: 10-90% on operating, 95% on storage Dielectric Withstand: Primary frame ground 1800V AC for Noise Killer (thermal fan speed control function) Efficiency: 82% minimum, typical up to 87% Output over voltage, short circuit, and over current protection Rise time: Less than 20ms 100% Hi-pot, ATE, and burn-in tested Hold-up Time: 17ms minimum at nominal input voltage Re-settable power shut down Power Good Signal: Power on delay time 100 ~ 500ms, off Complies with FCC part 15 subpart J class B 115Vac operation, Leakage Current: Less than 3.5mA at 264Vac, 50Hz MTBF: 100,000 hours on maximum load at +25°C and CISPR 22 class B at 230Vac operation delay 1ms minimum (TTL and CMOS compatible) Input Characteristics Input Range: 90 ~ 265Vac (RMS), Full Range Input Frequency: 47 ~ 63Hz Input Current: Max 12A (RMS) @ 115Vac, 6A (RMS) @ 230Vac Inrush Current: No damage at cold start Output Characteristics Output Voltage +3.3V +5V +12V1 +12V2 +12V3 +12V4 -12V +5Vsb *+3.3V and +5V total output not exceed 150W * Total output for this subject power supply is 600W Sparkle Power Inc. Main Office 1000 Rock Avenue San Jose, CA 95131 TEL: 408-519-8888 FAX: 408-519-9999 E-MAIL: [email protected] *Maximum combined current for 12V outputs shall be 48A Sparkle Power Inc. Los Angeles Office 17071 Green Drive City of Industry, CA 91745 TEL: 626-839-7180 FAX: 626-839-3395

Open the catalog to page 1

SPI600A8BB

SPI600A8BB

Catalog excerpts

All Sparkle Power catalogs and technical brochures

Archived catalogs