*mydirectindustry

SPI400F4BG

Product catalog summary

Input Characteristics
Input range is 90 ~ 264Vac with a frequency of 47 ~ 63Hz. Maximum input current is 6.0A at 115Vac and 3.0A at 230Vac. The inrush current causes no damage.

Specifications
Operating temperature range is 0°C to +50°C at full load, while storage and shipping range from -20°C to +80°C. Humidity is 85% during operation and 95% during storage. Dielectric withstand is 1800V AC for 2 seconds. Efficiency is typically greater than 90%. Rise time is less than 20ms, and hold-up time is a minimum of 16ms at nominal input voltage. Power good signal has a power-on delay time of 100 ~ 500ms and an off delay of 1ms minimum. Leakage current is less than 3.5mA at 264Vac, 50Hz. MTBF is 100,000 hours at maximum load and +25°C. Dimensions are 190x81.5x40.5mm.

Output Characteristics
Various output voltages are provided with specific load regulations and ripple & noise levels. Total output for +3.3V and +5V should not exceed 120W, and the total output for the power supply is 400W.

Features
The power supply complies with the Flex ATX standard and includes active power factor correction meeting EN61000-3-2. It is high efficiency and reliability, compatible with the European Union Directive 2002/95/EC. It features a remote ON/OFF function, an internal 12V DC fan, low noise and ripple, and protections against over voltage, short circuit, and over current. It is 100% Hi-pot, ATE, and burn-in tested, with a re-settable power shutdown. It complies with FCC part 15 subpart J class B for 115Vac operation and CISPR 22 class B for 230Vac operation. It is approved by UL/CUL60950-1 2nd, TUV EN60950-1 2nd, CB 60950-1 2nd, FCC, and EMC.

Catalog excerpts

Sparkle Power Inc. A Leading Power Supply Manufacturer Web site: www.sparklepower.com SPI400F4BG (80PLUS Gold, RoHS Compliant) 400 Watts Flex ATX Switching Power Supply Features Specification Complied with Flex ATX standard Active Power Factor Correction (PFC) meet EN61000-3-2 High efficiency and reliability Compatible with European Union Directive 2002/95/EC (Restriction on Humidity: 85% on operating, 95% on storage Hazardous Substances). Dielectric Withstand: Primary frame ground 1800V AC for Temperature Range: Operating: 0°C ~ +50°C on full load; storage & shipping: -20°C ~ +80°C Remote ON/OFF function Rise time: Less than 20ms Output over voltage, short circuit, and over current protection Hold-up Time: 16 ms minimum at nominal input voltage 100% Hi-pot, ATE, and burn-in tested Power Good Signal: Power on delay time 100 ~ 500ms, off Re-settable power shut down Complies with FCC part 15 subpart J class B 115Vac operation, and Leakage Current: Less than 3.5mA at 264Vac, 50Hz CISPR 22 class B at 230Vac operation MTBF: 100,000 hours on maximum load at +25°C delay 1ms minimum (TTL and CMOS compatible) Dimensions (LxWxH): 190x81.5x40.5mm / 7.48x3.2x 1.6 inch Input Characteristics Input Range: 90 ~ 264Vac, Full Range Input Frequency: 47 ~ 63Hz Input Current: Max 6.0A @ 115Vac, 3.0A @ 230Vac Inrush Current: No Damage Output Characteristics Output Voltage +3.3V +5V +12V1 +12V2 -12V +5Vsb -5V *+3.3V and +5V total output not exceed 120W * -5V Option * Total output for this subject power supply is 400W Sparkle Power Inc. Main Office 1000 Rock Avenue San Jose, CA 95131 TEL: 408-519-8888 FAX: 408-519-9999 E-MAIL: [email protected] Sparkle Power Inc. Los Angeles Office 17071 Green Drive City of Industry, CA 91745 TEL: 626-839-7180 FAX: 626-839-3395

Open the catalog to page 1

SPI400F4BG

SPI400F4BG

Catalog excerpts

All Sparkle Power catalogs and technical brochures

Archived catalogs