FSP600-60MRA(S)

Product catalog summary

Input Characteristics
The power supply operates within an input range of 90 to 264Vac and a frequency range of 47 to 63Hz. It supports an input current of 10A to 5A at 100 to 240VAC and is designed to withstand inrush current without damage.

Specifications

Temperature Range: Operating temperature is 0°C to +50°C at full load, and storage temperature is -40°C to +70°C.
Altitude: Operates up to 2,000 meters and can be stored at altitudes up to 15,000 meters.
Humidity: 90% during operation and 95% during storage.
Dielectric Withstand: 1800V AC for 2 seconds between primary frame and ground.
Efficiency: Typically greater than 90%.
Rise Time: 5 to 70 milliseconds.
Hold-up Time: Minimum of 16 milliseconds at nominal input voltage.
Power Good Signal: Power on delay time is 100 to 500ms, with an off delay of at least 1ms.
Leakage Current: Less than 3.5mA at 264Vac, 50Hz.
MTBF: 100,000 hours at maximum load and +25°C.
Dimensions: 190x150x84mm (7.48x5.9x3.3 inches).

Output Characteristics
The power supply provides various output voltages with specific load regulations and ripple & noise levels. The total output power is 600W, with specific limits on the +3.3V and +5V outputs not exceeding 130W.

Features

Supports hot swapping and includes a Power Management Bus (PM Bus REV1.2).
Complies with Intel/AMD platforms and includes active Power Factor Correction (PFC) meeting EN61000-3-2 standards.
Achieves high efficiency with 80 Plus Gold certification.
Designed for high reliability with redundancy for continuous operation.
Complies with the European Union Directive 2002/95/EC on hazardous substances.
Includes an internal 12V DC fan, audible alarm, TTL alarm signal, and power LED indicator for alerts on fan failure, OVP, OCP, and SCP.
Undergoes 100% Hi-pot, ATE, and burn-in testing.
Complies with FCC part 15 subpart J class B for 115Vac operation and CISPR 22 class B for 230Vac operation.
Approved by UL/CUL60950-1, TUV EN60950-1, FCC, EMC, and CE.

Catalog excerpts

Sparkle Power Inc. A Leading Power Supply Manufacturer Web site: www.sparklepower.com FSP600-60MRA(S) (80PLUS Gold, PM_Bus, RoHS Compliant) 600Watts 1+1 Mini Redundant Switching Power Supply Features Hot Swapping. Redundant, Power Management Bus (PM Bus REV1.2) Complied with latest Intel/AMD platform. Active Power Factor Correction (PFC) meet EN61000-3-2 High efficiency 80 Plus Gold Extremely high overall reliability with redundancy for 24 by 7 Humidity: 90% on operating, 95% on storage Compatible with European Union Directive 2002/95/EC (Restriction on Dielectric Withstand: Primary frame ground 1800V AC for Temperature Range: Operating: 0°C ~ +50°C on full load; storage : -40°C ~ +70°C Altitude : Operating: up to 2K Meter; Non- Operating: 0~15KM. Hazardous Substances). Audible Alarm, TTL Alarm Signal .and Power LED indicator SMB Hold-up Time: 16 ms minimum at nominal input voltage 100% Hi-pot, ATE, and burn-in tested Power Good Signal: Power on delay time 100 ~ 500ms, off Complies with FCC part 15 subpart J class B 115Vac operation, and delay 1ms minimum (TTL and CMOS compatible) CISPR 22 class B at 230Vac operation Leakage Current: Less than 3.5mA at 264Vac, 50Hz MTBF: 100,000 hours on maximum load at +25°C Input Characteristics Dimensions (LxWxH): 190x150x84mm / 7.48x5.9x3.3 inch Input Range: 90 ~ 264Vac, Full Range Input Frequency: 47 ~ 63Hz Input Current: 10A~5A at 100~240VAC Inrush Current: No Damage Output Characteristics Output Voltage +3.3V +5V +12V -5V -12V +5Vsb *-5V is Option *+3.3V and +5V total output not exceed 130W * Total output for this subject power supply is 600W Sparkle Power Inc. Main Office 1000 Rock Avenue San Jose, CA 95131 TEL: 408-519-8888 FAX: 408-519-9999 E-MAIL: [email protected] Sparkle Power Inc. Los Angeles Office 17071 Green Drive City of Industry, CA 91745 TEL: 626-839-7180 FAX: 626-839-3395

Open the catalog to page 1

FSP600-60MRA(S)

FSP600-60MRA(S)

Catalog excerpts

All Sparkle Power catalogs and technical brochures

Archived catalogs