FSP600-502UQ

Product catalog summary

Input Characteristics
Input Range: 90 ~ 264Vac, Full Range Input
Frequency: 47 ~ 63Hz
Input Current: Max 10A @ 115Vac, 5A @ 230Vac
Inrush Current: No Damage

Specification
Temperature Range: Operating: 0°C ~ +50°C on full load; storage & shipping: -20°C ~ +80°C
Humidity: Operation: 85% RH, Non-condensing; Storage: 95% RH, Non-condensing
Dielectric Withstand: Primary frame ground 1800V AC for 2 seconds
Altitude: Operating up to 5K Meter
Efficiency: Typical > 90%
Rise time: Less than 20ms
Hold-up Time: 16 ms minimum at nominal input voltage
Power Good Signal: Power on delay time 100 ~ 500ms, off delay 1ms minimum (TTL and CMOS compatible)
Leakage Current: Less than 3.5mA at 264Vac, 50Hz
MTBF: 100,000 hours on maximum load at +25°C
Dimensions (LxWxH): 260x100x70mm / 10.24x3.9x2.7 inch

Output Characteristics
Output Voltage: +3.3V, +5V, +12V, -12V, +5Vsb
Minimum Load: 0.1A, 1.0A, 1.0A, 0A, 0A respectively
Normal Load: 17A, 17A, 24A, 0.25A, 2.0A respectively
Maximum Load: 25A, 25A, 48A, 0.5A, 4.0A respectively
Load Regulation: ± 5% for +3.3V, +5V, +12V, +5Vsb; ± 10% for -12V
Ripple & Noise: 50mV P-P for +3.3V, +5V, +5Vsb; 120mV P-P for +12V, -12V
Total output not to exceed 150W for +3.3V and +5V
Total output for power supply is 600W

Features
Power Management Bus (PM Bus Rev:1.2)
Active Power Factor Correction (PFC) meets EN61000-3-2
High efficiency 80plus Gold and reliability
Compatible with European Union Directive 2002/95/EC (Restriction on Hazardous Substances)
Remote ON/OFF function
Internal 12V DC fan included
Low noise and ripple
Output over voltage, short circuit, and over current protection
100% Hi-pot, ATE, and burn-in tested
Re-settable power shut down
Complies with FCC part 15 subpart J class B 115Vac operation, and CISPR 22 class B at 230Vac operation
Approved by: UL/CUL60950-1 2nd, TUV EN60950-1 2nd, CB 60950-1 2nd, FCC, EMC, CE

Catalog excerpts

Sparkle Power Inc. A Leading Power Supply Manufacturer Web site: www.sparklepower.com (80PLUS Gold, RoHS Compliant) 600 Watts, PM Bus, 2U Switching Power Supply Features Active Power Factor Correction (PFC) meet EN61000-3-2 High efficiency 80plus Gold and reliability Compatible with European Union Directive 2002/95/EC (Restriction on Temperature Range: Operating: 0°C ~ +50°C on full load; storage & shipping: -20°C ~ +80°C Humidity: Operation : 85% RH, Non-condensing. Hazardous Substances). Remote ON/OFF function Altitude: operating up to 5K Meter. Output over voltage, short circuit, and over current protection 100% Hi-pot, ATE, and burn-in tested Rise time: Less than 20ms Re-settable power shut down Hold-up Time: 16 ms minimum at nominal input voltage Complies with FCC part 15 subpart J class B 115Vac operation, and Power Good Signal: Power on delay time 100 ~ 500ms, off Dielectric Withstand: Primary frame ground 1800V AC for 2 second CISPR 22 class B at 230Vac operation delay 1ms minimum (TTL and CMOS compatible) Leakage Current: Less than 3.5mA at 264Vac, 50Hz MTBF: 100,000 hours on maximum load at +25°C Dimensions (LxWxH): 260x100x70mm / Input Characteristics Input Range: 90 ~ 264Vac, Full Range Input Frequency: 47 ~ 63Hz Input Current: Max 10A @ 115Vac, 5A @ 230Vac Inrush Current: No Damage Output Characteristics Output Voltage +3.3V +5V +12V -12V +5Vsb *+3.3V and +5V total output not exceed 150W * Total output for this subject power supply is 600W Sparkle Power Inc. Main Office 1000 Rock Avenue San Jose, CA 95131 TEL: 408-519-8888 FAX: 408-519-9999 E-MAIL: [email protected] Sparkle Power Inc. Los Angeles Office 17071 Green Drive City of Industry, CA 91745 TEL: 626-839-7180 FAX: 626-839-3395

Open the catalog to page 1

FSP600-502UQ

FSP600-502UQ

Catalog excerpts

All Sparkle Power catalogs and technical brochures

Archived catalogs