FSP250-70PFU

Product catalog summary

Input Characteristics
The power supply operates within an input range of 90 to 264Vac (RMS) and a frequency range of 47 to 63Hz. The maximum input current is 6.0A at 115Vac and 3.0A at 230Vac. It is designed to withstand inrush current at cold start without damage.

Specification

Temperature Range: Operates between 0°C and +50°C at full load, with storage and shipping temperatures ranging from -20°C to +80°C.
Humidity: Operates at 5-85% humidity and can be stored at 5-95% humidity.
Dielectric Withstand: Can withstand 1800V AC for 2 seconds between primary and frame ground.
Efficiency: Typically greater than 80%.
Rise Time: Less than 20ms.
Hold-up Time: Minimum of 13ms at nominal input voltage.
Power Good Signal: Power on delay time ranges from 100 to 500ms, with a minimum off delay of 1ms.
Leakage Current: Less than 3.5mA at 264Vac, 63Hz.
MTBF: 100,000 hours at maximum load and +25°C.
Dimensions: 140x150x86mm (5.5x5.9x3.4 inches).

Output Characteristics
The power supply provides various output voltages with specific load regulations and ripple & noise levels. The total output should not exceed 250W, with specific limits on +3.3V and +5V outputs not exceeding 150W. An optional -5V output is available.

Features

Complies with ATX12V standard and includes Active Power Factor Correction (PFC) meeting EN61000-3-2.
High efficiency and reliability, compatible with EU Directive 2002/95/EC (RoHS).
Includes a remote ON/OFF function, internal 12V DC fan, and noise reduction features.
Offers protection against over voltage, short circuit, and over current.
100% Hi-pot, ATE, and burn-in tested.
Complies with FCC part 15 subpart J class B for 115Vac and CISPR 22 class B for 230Vac operations.
Approved by CUL/UL60950-1 2nd, TUV EN60950-1 2nd, CB 60950-1 2nd report, FCC, and EMC.

Catalog excerpts

Sparkle Power Inc. A Leading Power Supply Manufacturer Web site: www.sparklepower.com FSP250-70PFU (80PLUS Standard, RoHS Compliant) 250 Watts ATX12V Switching Power Supply Features Complied with ATX12V standard Active Power Factor Correction (PFC) meet EN61000-3-2 High efficiency and reliability Compatible with European Union Directive 2002/95/EC (Restriction on Hazardous Substances). Remote ON/OFF function Noise Killer AC input I/O switch is option. Output over voltage, short circuit, and over current protection 100% Hi-pot, ATE, and burn-in tested Re-settable power shut down Complies with FCC part 15 subpart J class B 115Vac operation, Humidity: 5~85% on operating, 5~95% on storage Dielectric Withstand: Primary frame ground 1800V AC for 2 second Rise time: Less than 20ms Hold-up Time: 13 ms minimum at nominal input voltage Power Good Signal: Power on delay time 100 ~ 500ms, off delay 1ms minimum (TTL and CMOS compatible) Leakage Current: Less than 3.5mA at 264Vac, 63Hz MTBF: 100,000 hours on maximum load at +25°C and CISPR 22 class B at 230Vac operation Temperature Range: Operating: 0°C ~ +50°C on full load; Input Characteristics Input Range: 90 ~ 264Vac (RMS), Full Range Input Frequency: 47 ~ 63Hz Input Current: Max 6.0A(RMS) @ 115Vac, 3.0A(RMS) @ 230Vac Inrush Current: No damage at cold start Output Characteristics Output Voltage +3.3V +5V +12V1 +12V2 -12V +5Vsb -5V (option) *+3.3V and +5V total output not exceed 150W * Total output for this subject power supply is 250W Sparkle Power Inc. Main Office 1000 Rock Avenue San Jose, CA 95131 TEL: 408-519-8888 FAX: 408-519-9999 E-MAIL: [email protected] Sparkle Power Inc. Los Angeles Office 17071 Green Drive City of Industry, CA 91745 TEL: 626-839-7180 FAX: 626-839-3395

Open the catalog to page 1

FSP250-70PFU

FSP250-70PFU

Catalog excerpts

All Sparkle Power catalogs and technical brochures

Archived catalogs