FSP250-70MU

FSP250-70MU

Product catalog summary
Input Characteristics
  • Input Range: 90 ~ 264Vac (RMS), Full Range Input
  • Frequency: 47 ~ 63Hz
  • Input Current: Max 4A (RMS) @115Vac, 2A (RMS) @230Vac
  • Inrush Current: No damage
Specification
  • Temperature Range: Operating: 0°C ~ +50°C; Storage & Shipping: -20°C ~ +80°C
  • Humidity: 85% on operating, 95% on storage
  • Dielectric Withstand: Primary frame ground 1800V AC for 2 seconds
  • Efficiency: Typical up to 80%
  • Rise Time: Less than 20ms
  • Hold-up Time: 17ms minimum at nominal input voltage
  • Power Good Signal: Power on delay time 100 ~ 500ms, off delay 1ms minimum (TTL and CMOS compatible)
  • Leakage Current: Less than 0.3mA at 264Vac, 63Hz
  • MTBF: 100,000 hours on maximum load at +25°C
  • Dimensions: 190x100x40.5mm / 74.8x39.4x16inch
Output Characteristics
  • Output Voltage: Various outputs with specific load regulations and ripple & noise levels
  • Maximum Combined Output: +3.3V and +5V not to exceed 110W; +12V1, +12V2, +5V, and +3.3V not to exceed 231W; Total output 250W
Features
  • Complies with ATX12V standard
  • Active Power Factor Correction (PFC) meets EN61000-3-2
  • High efficiency and reliability
  • Compatible with EU Directive 2002/95/EC (RoHS)
  • Remote ON/OFF function
  • Internal 12V DC fan included
  • Noise Killer (thermal fan speed control function)
  • Low noise and ripple
  • Output over voltage, short circuit, and over current protection
  • 100% Hi-pot, ATE, and burn-in tested
  • Re-settable power shut down
  • Complies with FCC part 18 Subpart C 120Vac operation, and EN60601-1-2, EN55011,230Vac operation
  • Approved by UL/CUL 60601-1, VDE EN60601-1, CB, FCC, CE, EMC
See more

Catalog excerpts

FSP250-70MU-1

Sparkle Power Inc. A Leading Power Supply Manufacturer Web site: www.sparklepower.com 250 Watts ATX12V 1U Medical Grade Power Supply Features • Complied with ATX12V standard Active Power Factor Correction (PFC) meet EN61000-3-2 High efficiency and reliability Compatible with European Union Directive 2002/95/EC (Restriction on Hazardous Substances) Temperature Range: Operating: 0°C ~ +50°C; storage & Remote ON/OFF function Noise Killer (thermal fan speed control function) Humidity: 85% on operating, 95% on storage Dielectric Withstand: Primary frame ground 1800V AC for Output over voltage, short circuit, and over current protection 100% Hi-pot, ATE, and burn-in tested Re-settable power shut down Rise time: Less than 20ms Complies with FCC part 18 Subpart C 120Vac operation, and Hold-up Time: 17ms minimum at nominal input voltage Power Good Signal: Power on delay time 100 ~ 500ms, off delay 1ms minimum (TTL and CMOS compatible) CE,EMC Input Characteristics Leakage Current: Less than 0.3mA at 264Vac, 63Hz MTBF: 100,000 hours on maximum load at +25°C Input Range: 90 ~ 264Vac (RMS), Full Range Input Frequency: 47 ~ 63Hz Input Current: Max 4A (RMS) @115Vac, 2A (RMS) @230Vac Inrush Current: No damage. Output Characteristics Output Voltage Minimum Load Normal Load Maximum Load Ripple & Noise 0.0A 1.25A 2.5A +5Vsb * +3.3V and +5V total output not exceed 110W * +12V1 and +12V2 and +5V and +3.3V total output shall not exceed 231W * Maximum combined current for the 12V outputs shall be 17A * Total output for this subject power supply is 250W Sparkle Power Inc. Main Office 1000 Rock Avenue San Jose, CA 95131 TEL: 408-519-8888 FAX: 408-519-9999 E-MAIL: [email protected] Sparkle Power Inc. Los Angeles Office 17071 Green Drive City of Industry, CA 91745 TEL: 626-839-7180 FAX: 626-839-3395

 Open the catalog to page 1

All Sparkle Power catalogs and technical brochures

  1. FSP2400-20FM

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.