Input Characteristics
- Input Range: 90 ~ 265Vac, Full Range Input
- Frequency: 47 ~ 63Hz
- Input Current: Max 4A @ 115Vac, 2A @ 230Vac
- Inrush Current: No damage

Specifications
- Temperature Range: Operating: 0°C ~ +50°C; Storage & Shipping: -20°C ~ +80°C
- Humidity: 85% on operating, 95% on storage
- Dielectric Withstand: Primary frame ground 1800V AC for 1 second
- Efficiency: 82% minimum
- Rise Time: Less than 20ms
- Hold-up Time: 17ms minimum at nominal input voltage
- Power Good Signal: Power on delay time 100 ~ 500ms, off delay 1ms minimum (TTL compatible)
- Leakage Current: Less than 0.5mA at 264Vac, 50Hz
- MTBF: 100,000 hours on maximum load at 25°C
- Dimensions: 190cm x 81cm x 40.5cm
- The +3.3V and +5V total output shall not exceed 60W.

Output Characteristics
- Complied with FLEX ATX and ATX12V standard
- Active Power Factor Correction (PFC) meets EN61000-3-2
- High efficiency and reliability
- Compatible with European Union Directive 2002/95/EC (Restriction on Hazardous Substances)
- Remote ON/OFF function
- Internal 12V DC fan included
- Low noise and ripple
- Output over voltage, short circuit, and over current protection
- 100% Hi-pot, ATE, and burn-in tested
- Re-settable power shut down
- FCC Part 15 Subpart J, Class ‘B’ 115 Vac operation. CISPR 22 Class ‘B’ 230 Vac operation.
- Approved by UL 60601, TUV 60601, FCC, EMC, CE, CB REPORT (IEC 60601)
- 220 Watts FLEX ATX Medical Grade Power Supply

Output Nominal Regulation and Ripple/Noise
- +3.3V: 50mV, 0.3A min, 9.0A max
- +5V: 50mV, 0.5A min, 12.0A max
- +12V: 120mV, 1.0A min, 14.0A max
- -12V: 120mV, 0.0A min, 0.3A max
- -5V: 100mV, 0.0A min, 0.3A max
- +5VSB: 50mV, 0.0A min, 2.5A max
- Regulation to 10% when all load is off for -12V, +3.3V, +5V, +12V.

Contact Information
- Main Office: 1000 Rock Avenue, San Jose, CA 95131, TEL: 408-519-8888, FAX: 408-519-9999, E-MAIL: [email protected]
- Los Angeles Office: 17071 Green Drive, City of Industry, CA 91745, TEL: 626-839-7180, FAX: 626-839-3395