*mydirectindustry

Catalogs
Sparkle Power
FSP180-50PLA

FSP180-50PLA

1 / 2 PagesView full catalog

FSP180-50PLA

Product catalog summary

Specifications:

Temperature Range: Operating: 0°C to +50°C; Storage & Shipping: -20°C to +80°C.
Humidity: 5% to 95% for both operating and storage.
Dielectric Withstand: 1800 VAC for 2 seconds from input to frame ground.
Efficiency: Minimum 68% at nominal AC voltage and frequency with maximum load.
Rise Time: Less than 20ms.
Hold-up Time: Minimum 17ms at nominal input voltage.
Power Good Signal: Power on delay time 100-500ms, off delay 1ms minimum.
Leakage Current: Not exceeding 3.5mA at 264Vac, 50Hz.
MTBF: 100,000 hours at maximum load and +25°C.
Dimensions: 150x81.5x40.5mm (6x3.2x1.6in).

Output Characteristics:

+3.3V: Min Load 0.3A, Max Load 16.8A, Regulation ±5%, Ripple & Noise 50mV P-P.
+5V: Min Load 0.3A, Max Load 12A, Regulation ±5%, Ripple & Noise 50mV P-P.
+12V: Min Load 1.5A, Max Load 10A, Peak Load 13A, Regulation ±5%, Ripple & Noise 120mV P-P.
-12V: Min Load 0.0A, Max Load 0.8A, Regulation ±10%, Ripple & Noise 120mV P-P.
+5Vsb: Min Load 0.0A, Max Load 2.0A, Regulation ±5%, Ripple & Noise 50mV P-P.
Total output for +5V and +3.3V should not exceed 61W; combined output for +3.3V, +5V, and +12V should not exceed 165W.

Features:

Complies with Flex ATX and ATX12V standards.
Active Power Factor Correction (PFC) meets EN61000-3-2.
High efficiency and reliability with remote ON/OFF function.
Includes internal 12V DC fan and thermal fan speed control for noise reduction.
Complies with FCC part 15 subpart J class B and CISPR 22 class B standards.
Protection against over voltage, short circuit, and over current.
100% Hi-pot, ATE, and burn-in tested with re-settable power shutdown.
Approved by UL60950, CSA C22.2 NO. 60950, TUV EN60950, VDE EN60950, NEMKO EN60950 (CB Report), CE.

Input Characteristics:

Input Range: 90 ~ 265Vac (RMS), Full Range Input.
Frequency: 47 ~ 63Hz.
Input Current: 4A (RMS) @115Vac, 2A (RMS) @230Vac.
Inrush Current: 50A Max @115Vac, 80A Max @230Vac cold start.

Contact Information:

Main Office: 1000 Rock Avenue, San Jose, CA 95131, TEL: 408-519-8888, FAX: 408-519-9999, E-MAIL: [email protected].
Los Angeles Office: 17071 Green Drive, City of Industry, CA 91745, TEL: 626-839-7180, FAX: 626-839-3395.

Catalog excerpts

Sparkle Power Inc. A Leading Power Supply Manufacturer Web site: www.sparklepower.com FSP180-50PLA (Active PFC & RoHS Compliant) 180 Watts Flex ATX12V Switching Power Supply Features • Complied with Flex ATX and ATX12V standard Active Power Factor Correction (PFC) meet EN61000-3-2 High efficiency and reliability Remote ON/OFF function Noise Killer (thermal fan speed control function) Complies with FCC part 15 subpart J class B 115Vac operation, Temperature Range: Operating: 0°C ~ +50°C on full load; storage & shipping: -20°C ~ +80°C 100% Hi-pot, ATE, and burn-in tested Re-settable power shut down Dielectric Withstand: Input to frame ground 1800 VAC for Output over voltage, short circuit, and over current protection Humidity: 5 ~ 95% on operating and storage and CISPR 22 class B at 230Vac operation Efficiency: 68% at minimum measured at nominal AC main voltage and frequency with maximum load on all outputs Rise time: Less than 20ms Hold-up Time: 17ms minimum at nominal input voltage Power Good Signal: Power on delay time 100 ~ 500ms, off Input Characteristics delay 1ms minimum (TTL and CMOS compatible) Input Range: 90 ~ 265Vac (RMS), Full Range Input Leakage Current: Not exceed 3.5mA at 264Vac, 50Hz MTBF: 100,000 hours on maximum load at +25°C Sparkle Power Inc. Main Office 1000 Rock Avenue San Jose, CA 95131 TEL: 408-519-8888 FAX: 408-519-9999 E-MAIL: [email protected] Sparkle Power Inc. Los Angeles Office 17071 Green Drive City of Industry, CA 91745 TEL: 626-839-7180 FAX: 626-839-3395

Open the catalog to page 1

jcftmm^m ^mmm ^mmm

Open the catalog to page 2

FSP180-50PLA

FSP180-50PLA

Catalog excerpts

All Sparkle Power catalogs and technical brochures

Archived catalogs