TECHNICAL DATASHEET 15-18W Medical Power Supplies FSP018M Series FSP018M SeriesFEATURES • Wide Input voltage range 85~264Vac • High altitude 5000M operation • High efficiency compliant with DOE Level VI and CoC EPS V5 Tier 2 requirements * No load power consumption less than 0.075 W * Average active efficiency greater than 85% @ 18W Output voltage /current: Maximum output power: Ripple and noise: Temperature coefficient: Transient response: OUTPUT SPECIFICATIONS See rating chart. 1% peak to peak maximum(except 100 mVp-p max. for lower than output 10 V) Latch off Auto-recovery Latch off ±0.04% /°C maximum Maximum excursion of 4% or better on all models, recovering to 1% of final value within 500 us after a 25% step load change Relative humidity: 10% to 90% non-condensing Line regulation: ±0.5% maximum at full load Inrush current: The cold inrush current must not cause the input fuse to open or cause damage to components. Operation Altitude 5000 meters Withstand voltage: 4000 VAC from input to output (2 MOPP) 1500 VAC from input to ground MTBF: 300,000 hours at full load at 25°C ambient, calculated EN55011: Class B conducted, Class B radiated FCC: Class B conducted, Class B radiated VCCI: Class B conducted, Class B radiated EN61000-3-2: Harmonic distortion, Class A EN61000-4-6: Conducted immunity, 6 Vrms EN61000-4-8: Magnetic field immunity, 30 A/m EN61000-4-11: Voltage dip immunity, 30% reduction for 500 ms, 60% © 2021 FSP Group. All Rights Reserved. All trademarks are registered to their respective owners. 2021.04 spec

TECHNICAL DATASHEET OUTPUT VOLTAGE/CURRENT RATING CHART Model 1. FSP018M-DxU models are with fixed North American AC plug for safety approval cULus only, and FSP018M-DxE models with fixed European AC plug for safety approval TUV & CE only. 2. Ripple and noise is maximum peak to peak voltage value measured at output within 20 MHz bandwidth, at rated line voltage and output load ranges, and with a 10 ^F tantalum capacitor in parallel with a 0.1 ^F ceramic capacitor across the output. © 2021 FSP Group. All Rights Reserved. All trademarks are registered to their respective owners.

TECHNICAL DATASHEET 15-18W Medical Power Supplies FSP018M Series MECHANICAL SPECIFICATIONS 1. FSP018M-DXE Series models NOTES: 1. Dimensions shown in mm 2. Tolerance 1 maximum Weight: 150 grams (0.33 lbs.) approx. © 2021 FSP Group. All Rights Reserved. All trademarks are registered to their respective owners. 2021.04 spec