CA-Series CA-Series Single Curve with Tangent Straights Conveyors J O I N T H E Q U I E T R E V O L U T I O N I N C O N V E Y O R T E C H N O L O G Y

J O I N T H E Q U I E T R E V O L U T I O N CA-Serie The WhisperTraxTM CA-Series curving with straight section conveyors allow custom design to fit various layouts. There are three choices of turning radius and varying overall straight length coming out of the curve. They provide dependable, nearly maintenance free operation and are virtually silent while operating. Features & Benefits: Six (6) belt widths available for a variety of applications Choose between 30-, 45-, and 90-degree curves Speed range of 5 to 75 feet per minute (1.5 to 22.9 meters per minute) Custom speed ranges available Increased...

I N C O N V E Y O R T E C H N O L O G Y es Bearings Lubricated SpanLonTM bushings are internal to the conveyor frame Foot Construction Steel flange for easy anchoring Conveyor Chain White, acetal plastic with stainless steel hinge rods for long life Ease of maintenance… Chain can be taken apart at any link

J O I N T H E Q U I E T R E V O L U T I O N CA-PLN The WhisperTraxTM CA-PLN curving, straight section conveyor with plain chain is ideal for transporting items around curves. The tight knit of the chain lattice provides a smooth base for small products down to 1 inch (25.4mm) in diameter and offers the tightest turning radius in the industry. If Gravity Transfers are used, the minimum size is 4.5 inches (114.3mm) in diameter. The transfer is set to a decline angle of approximately 6°. CA-PLN Plain Chain Ideal for... Order filling Carton transporting End-to-end transfers

I N C O N V E Y O R T E C H N O L O G Y CA-PLN Specifications Top of Conveying Surface (Adjustable) 7-7/8” (200mm) 7-1/16” (179.4mm) 5-5/8” (142.9mm) Adjustable Length (Typical both ends) Chain Width Degree of Curve Min. Centerline Radius = 24”(609.6mm) or (chain width*2.29) – 2.64” (67.1mm), whichever is greater Chain Width ±3-3/4” (95.25mm) 21-1/8” (536.5mm) 10” (254mm) Minimum of 1.77 ft (539.5mm) or 1* Chain Width, whichever is greater Drive Hand Location Right Hand Pull Left Hand Pull Right Hand Push Left Hand Push Product Flow Note: Regardless of drive position the conveyor will run in...

J O I N T H E Q U I E T R E V O L U T I O N CA-RAS The WhisperTraxTM CA-RAS curving, straight section conveyor with raised chain is typically used with Finger Transfers when conveyors are end to end and transfer of product is necessary. Raised chain with a Finger Transfer can transfer product down to 1.5 inches (38.1mm) in diameter. The transfer is set to a decline angle of approximately 10°. Raised top chain can also be used to reduce the amount of contact between the chain and the product being transported, increasing airflow. CA-RAS Raised Chain Ideal for... Delicate packaging Small products...

I N C O N V E Y O R T E C H N O L O G Y CA-RAS Specifications 6-1/8” 8-1/8” (155.6mm) (206.4mm) 7-3/16” (182.6mm) Top of Conveying Surface (Adjustable) Chain Width Degree of Curve Min. Centerline Radius = 24”(609.6mm) or (chain width*2.29) – 2.64” (67.1mm), whichever is greater Chain Width ±3-3/4” (95.25mm) 21-1/8” (536.5mm) 10” (254mm) Minimum of 1.77 ft (539.5mm) or 1* Chain Width, whichever is greater Adjustable Length (Typical both ends) Drive Hand Location Right Hand Pull Left Hand Pull Right Hand Push Left Hand Push Product Flow Note: Regardless of drive position the conveyor will run in...

J O I N T H E Q U I E T R E V O L U T I O N CA-MSG CA-MSG Moving Side Guide Chain The WhisperTraxTM CA-MSG curving, straight section conveyor with moving side guide chain features 75mm left and right guides molded into the side links. This feature provides positive retention of products during transportation through curves. Use this type of chain where the product you are moving might get tangled in conventional guide rails. Gravity Transfers are not available with this type of chain. Ideal for... Irregular shapes Bulk product

I N C O N V E Y O R T E C H N O L O G Y CA-MSG Specifications 11-5/8” (295.3mm) 8-1/16” (204.8mm) 13-1/16” (331.8mm) Top of Conveying Surface (Adjustable) Height of Moving Side Guides: 75mm Chain Width Min. Centerline Radius = 24”(609.6mm) or (chain width*2.29) – 2.64” (67.1mm), whichever is greater Chain Width ±3-3/4” (95.25mm) 24-1/8” (612.8mm) 10” (254mm) Minimum of 1.77 ft (539.5mm) or 1* Chain Width, whichever is greater Degree of Curve Adjustable Length (Typical Both Ends) Drive Hand Location Right Hand Pull Left Hand Pull Right Hand Push Left Hand Push Product Flow Note: Regardless of...

J O I N T H E Q U I E T R E V O L U T I O N WhisperTraxTM Options Options for CA-Series Conveyors Fixed Offset Gravity Movimot Speed Slave Drive Articulated Ceiling Support Guide Rail Transfer Controller Capable Foot Caster Brackets CA-PLN • • • • • • • CA-RAS • • • • • • • CA-MSG • • • • Fixed Offset Guide Rail Inside face of guide rail matches with edge of conveyor chain. The guide rail material is ultra-high molecular weight polyethylene with a galvanized steel back channel for durability. The guide rail comes in both 1.25 inch (31.8mm) and 2.25 inch (57.2mm) widths. Gravity Transfer This...

I N C O N V E Y O R T E C H N O L O G Y CA-Series Specifications Dynamic Load Capacity (not to exceed 50 lbs. Per Linear Ft.) Chart shows conveyors based upon 50 ft. total length. Standard Conveyor @ 65 FPM 3.76” Chain Width* 7.31” Chain Width 10.85” Chain Width Total Load Total Load Total Load H.P. 30º 45º 90º 30º 45º 90º 30º 45º 90º 1/3 hp 500-600 lbs 450-600 lbs 300-550 lbs 400-550 lbs 400-450 lbs 250-350 lbs 350-400 lbs 300-400 lbs 0-250 lbs 1/2 hp 700-850 lbs 650-850 lbs 500-600 lbs 700-950 lbs 650-800 lbs 450-700 lbs 650-750 lbs 600-750 lbs 400-600 lbs 3/4 hp 700-850 lbs 650-850 lbs 500-600...