Sheets
1 / 2 PagesView full catalog
Sheets
Product catalog summary
Overview
Profilglass specializes in producing sheets and strips in a wide range of alloys and formats for various sectors and applications. The company is committed to meeting specific customer requirements promptly.
Profilglass specializes in producing sheets and strips in a wide range of alloys and formats for various sectors and applications. The company is committed to meeting specific customer requirements promptly.
Alloys and Temper
The available alloys include EN AW 1050A, 1080A, 3003, 3005, 3105, 4006, 5049, 5005, 5754, 5083, 8006, and 8011. Other alloys can be supplied upon request. The physical states available are HO, H1X, H2X, and H3X.
The available alloys include EN AW 1050A, 1080A, 3003, 3005, 3105, 4006, 5049, 5005, 5754, 5083, 8006, and 8011. Other alloys can be supplied upon request. The physical states available are HO, H1X, H2X, and H3X.
Surface and Thickness
Profilglass offers various surface finishes such as Mill Finish, Embossed, Degreased, Washed, and Paper Interleaved. Protective films are available in thicknesses of 50-100 µm on one or both sides. Thickness ranges from 0.15 mm to 1.5 mm, with maximum widths of 1250 mm to 1620 mm depending on the finish.
Profilglass offers various surface finishes such as Mill Finish, Embossed, Degreased, Washed, and Paper Interleaved. Protective films are available in thicknesses of 50-100 µm on one or both sides. Thickness ranges from 0.15 mm to 1.5 mm, with maximum widths of 1250 mm to 1620 mm depending on the finish.
Compliance and Tolerances
The chemical composition and mechanical characteristics comply with EN 573-3 and EN 485-2 standards. Dimensional tolerances adhere to EN 485-4 standards.
The chemical composition and mechanical characteristics comply with EN 573-3 and EN 485-2 standards. Dimensional tolerances adhere to EN 485-4 standards.
Standard Production Dimensions
For thicknesses between 0.3 mm and 1.5 mm, dimensions range from a minimum of 120 x 180 mm to a maximum of 1620 x 6100 mm. For thicknesses between 1.5 mm and 6.0 mm, dimensions range from a minimum of 170 x 300 mm to a maximum of 1620 x 6100 mm.
For thicknesses between 0.3 mm and 1.5 mm, dimensions range from a minimum of 120 x 180 mm to a maximum of 1620 x 6100 mm. For thicknesses between 1.5 mm and 6.0 mm, dimensions range from a minimum of 170 x 300 mm to a maximum of 1620 x 6100 mm.
See more
Catalog excerpts
Lamiere Sheets Profilglass è in grado di produrre lamiere e bandelle in una vasta gamma di leghe e formati per i settori e le applicazioni più diverse. Dimensioni e richieste particolari dei clienti sono sempre studiate e realizzate dallo staff tecnico in tempi molto brevi. Profilglass is able to produce sheets in many alloys and dimensions for different sectors and applications. Customers’ various demands are analysed and realised in short term by Profilglass team.
Open the catalog to page 1
LAMIERE / SHEETS Leghe / Alloys Profilglass S.p.a. Via Meda, 28 Zona Ind.le Bellocchi 61030 Bellocchi di Fano (PU) - Italy Tel. +39 0721 856711 - Fax +39 0721 855520 - www.profilglass.it - [email protected]
Open the catalog to page 2All S.P.A. catalogs and technical brochures
FLAT ROLLED PRODUCTS6 Pages
Plates2 Pages
Circles2 Pages
Related Searches
- Profile
- Metal profile
- Industrial profile
- Aluminum profile
- Rectangular profile
- Aluminum
- Construction profile
- Frame profile
- Packaging foil
- Sheet metal
- Alloy profile
- Metal sheet metal
- Aluminum alloy
- Aluminum coil
- Thin sheet
- Film for automotive applications
- Aluminum plate
- Special profile
- Flat sheet metal
- Aluminum alloy sheet metal
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.