video corpo

Rocket Evaporator - 6 Pages

Add to MyDirectIndustry favorites
Rocket Evaporator

Catalog excerpts

Rocket Evaporator including concentration options

 Open the catalog to page 1

Genevac has followed a continuous programme of collaborative research and development in order to become the world leader in laboratory evaporation science and engineering. The culmination of this work is a revolutionary evaporation technology, now incorporated into the Rocket™ Evaporator. Dries or concentrates up to six 450ml flasks, or 18 ASE® tubes unattended. Developed as a consequence of users’ demands for an evaporator that could quickly process larger volumes of solvent in parallel and without supervision, the Rocket Evaporator is designed to dry or concentrate up to six 450ml...

 Open the catalog to page 2

Inside the Rocket The Rocket Evaporator uses a patented new technology, which works like this: Samples are loaded into the rotor, spun, and placed under vacuum (point B). By pulling a vacuum on the samples, the solvent(s) will boil at a low temperature, which is proportional to the pressure. Dri-Pure technology stops any bumping and cross contamination. To achieve very fast evaporation and precise temperature control, low temperature, low pressure steam is used to heat the samples directly. The steam condenses on the flasks/tubes, which are cold due to the solvent(s) boiling inside them....

 Open the catalog to page 3

The Rocket Evaporator can be used either to dry samples completely, or to concentrate them to a small volume. To help achieve the best results in the desired sample format, there are several options: Evaporation Flasks These are for drying or concentrating samples – if dried, samples require re-dissolving and then removing via pipette. 450ml volume. SampleGenie™ Flasks For a wide range of vials, from 12mm to 28mm diameter and up to 70mm tall. The SampleGenie system allows drying of the sample directly into the storage vial. 250ml (plus vial) volume. SampleGenie™ for GC Vials Specifically...

 Open the catalog to page 4

Six position rotor Built in solvent resistant vacuum pump Steam chamber Automatic cold trap drain Real time strobe viewing window USB upload/download of methods and data Plastic coated glass cold trap Easy to use controls

 Open the catalog to page 5

Mechanical data Maximum speed 1800rpm Maximum G-force 700g Drive system Direct drive Maximum Sample load 6 x 450ml Maximum imbalance 50g Vacuum system Pressure display 0-1200mbar Pressure control Automatic, 3mbar to atmosphere System ultimate vacuum 3mbar Bumping protection Dri-Pure® Temperature and control Control range Ambient +5°C to 60°C Control accuracy ±1°C Temperature sensing via thermistor Display range 0°C to 60°C End of method Time or automatic Visualisation Via built in strobe (optional) Solvent compatibility Boiling point range 40°C to 160°C at ambient Includes Alcohols,...

 Open the catalog to page 6

All SP Scientific catalogs and technical brochures

  1. FTS Systems

    20 Pages

  2. Freeze Dryer

    24 Pages

  3. Hull Overview

    16 Pages

  4. Vapor Trap

    2 Pages

  5. Titan Trap

    1 Pages

  6. BioCool IV40

    1 Pages

  7. ThermoJet

    2 Pages

  8. AirJet XE

    2 Pages

Archived catalogs

  1. DD-4X

    4 Pages