1. Catalogs
  2. SP Scientific Products
  3. LyoConstellation™ S30

LyoConstellation™ S30

LyoConstellation™ S30

LyoConstellation™ S30

Product catalog summary
Specifications Overview
The LyoConstellation™ S30 Pilot Lyophilizer is designed for precise and reliable lyophilization processes. It supports a seamless transition from R&D to production with technologies that ensure process accuracy and efficiency.

Electrical and Utility Requirements
  • Voltage: 200–250 VAC, 360–440 VAC, 420–500 VAC
  • Hertz: 50/60 Hz
  • Phase: 3 Φ
  • Breaker Amperage: 125 A, 80 A, 60 A
  • Compressed Air: 5.5 barg (80 psig)
  • Cooling Water: 22-37 Lpm (6-10 gpm)
  • Inert Gas for Backfilling and Vacuum Release: 0.21-0.34 barg (3-5 psig)
  • Steam for SIP: 54.43 kg/hour @ 1.38-1.72 barg
  • CIP Water/Media: 150 Lpm @ 4.14 barg

Performance Specifications
  • Lowest Shelf Temperature: -60 °C
  • Shelf Temperature Control Range: -55 °C to 65 °C
  • Shelf Temperature Control Accuracy: ± 0.5 °C
  • Maximum Sublimation Rate: 3,200 g/hour
  • Vacuum Time to 100 mTorr: ≤ 20 minutes

Key Features
  • Line of Sight™ approach for cycle development
  • Optional LyoFlux* TDLAS and ControLyo® Nucleation Technology
  • Designed to conform to good instrumentation practices

Materials and Construction
  • Product Chamber, Shelves, and Condenser Chamber: AISI 316L stainless steel
  • Surface Finish: Ra 0.635 micrometers for shelves and product chamber

Dimensional Data
  • Width: 173 cm
  • Length: 318 cm
  • Height: 229 cm
  • Maximum Weight: 4989.5 kg

Additional Options
  • ControLyo® Nucleation Technology
  • LyoFlux* 200 TDLAS Mass Flow Sensor
  • Independent CIP Skid
  • Tempris* Wireless Temperature Sensors

Refrigeration Information
  • System Refrigerant: R410A
  • Charge: Approximately 65 lbs
  • Total CO2e: 61.6 tonnes
See more

Catalog excerpts

LyoConstellation™ S30-1

LyoConstellation™ S30 Pilot Lyophilizer Key Features • Unmatched process accuracy and reliability • Deliver Line of Sight™ approach in cycle development & scale up using same technologies from R&D to production • Designed to conform to good instrumentation practices • Optional LyoFlux* TDLAS instrument with integrated communication with SP Hull LyoS™ 2.0 controls system software • Optional ControLyo® Nucleation Technology for improved product homogeneity and process efficiency Specifications Lowest Shelf Temperature (50 Hz / 60 Hz) Shelf Temperature Control Range Shelf Temperature Control Accuracy Shelf Pull-Down From 20° C To -40 °C Lowest Condenser Temperature Condenser Surface Area Condenser Pull-Down From 20 °C To -45 °C SP Hull LyoConstellation S30 Pilot Lyophilizer Utility Requirements Compressed Air Compressor Horsepower System Refrigerant Inert Gas For VLC / Vacuum Release Inert Gas Consumption (Full Vacuum Release) Steam For Sterilization In Place (SIP) 54.43 kg/hour (120 lbs/hour) @ 1.38-1.72 barg (20 -25 psig) Clean In Place (CIP) Water / Media Cooling Water Heat Removal Heat Output (Room), Peak Note: Performance specifications are based on SP test data from clean, dry and empty (CDE) units operating at an ambient room temperature of approximately 20 °C. SP recommends an optimum operating range of 15-25 °C (59-77 °F) with an RH of ≤ 80 % at sea level. Electrical Requirements Voltage Breaker Amperage ControLyo® Requirements (Optional) Volume To Vent Percentage Ratio (Vv/Vr) Note: Vent Volume (Vv) is the product chamber volume multiplied by 10. The volume of a standard SP Hull LyoConstellation S30 chamber is 0.71 m3 (25 ft3). Vr is the volume of the room in which the

 Open the catalog to page 1
LyoConstellation™ S30-2

LyoConstellation™ S30 Pilot Lyophilizer Dimensional Data FRONT VIEW Shelf Configuration Shelf Area Shelf Clearance 9 Shelves (8 Usable, 1 Radiant) Maximum Weight Shelf Dimensions (W × L) Shelf Loading Height Note: LyoFlux* TDLAS installation increases overall length by 74 cm (29 in). SP recommends a 60.7 cm (24 in) clearance around all sides of the unit for serviceability. Refrigeration Information Product Chamber Shelf Condenser Chamber AISI 316L stainless steel Isolation Valve Disc AISI 316L stainless steel AISI 316L stainless steel AISI 316L stainless steel Options / Other Considerations Surface...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.