LyoConstellation™ S10
2Pages

LyoConstellation™ S10 Pilot Lyophilizer Key Features • Unmatched process accuracy and reliability • Deliver Line of Sight™ approach in cycle development and scale up using same technologies from R&D to production • Designed to conform to good instrumentation practices • Optional LyoFLux* TDLAS instrument with integrated communication with SP Hull LyoS™ 2.0 controls system software • Optional ControLyo® Nucleation Technology for improved product homogeneity and process efficiency Specifications Lowest Shelf Temperature (50 Hz / 60 Hz) Shelf Temperature Control Range Shelf Temperature Control Accuracy Shelf Pull-Down From 20 °C To -40 °C Lowest Condenser Temperature Condenser Surface Area Condenser Pull-Down From 20 °C To -45 °C Compressor Horsepower System Refrigerant SP Hull LyoConstellation S10 Pilot Lyophilizer Utility Requirements Compressed Air Cooling Water Inert Gas For VLC/ Vacuum Release Inert Gas Consumption (Full Vacuum Release) Steam For Sterilization In Place (SIP) 18.14 kg/hour (40 lbs/hour) @ 1.23 -1.72 barg (20 -25 psig) Note: Performance specifications are based on SP test data from clean, dry and empty (CDE) units operating at an ambient room temperature of approximately 20 °C. SP recommends an optimum operating range of 15-25 °C (59-77 °F) with an RH of ≤ 80 % at sea level. Clean In Place (CIP) Water / Media Cooling Water Heat Removal Electrical Requirements Heat Output (Room), Peak Breaker Amperage ControLyo® Requirements (Optional) Volume To Vent Percentage Ratio (Vv/Vr) Note: Vent Volume (Vv) is the product chamber volume multiplied by 10. The volume of a standard SP Hull LyoConstellation S10 chamber is 0.178 m3 (6.3 ft3). Vr is the volume of the room in which the lyophilize

LyoConstellation™ Run-on Page Sub Title Run-on Page Title S10 Pilot Lyophilizer Dimensional Data Shelf Area Shelf Clearance Length From End Of Chamber Door To End Of Condenser Door, Right Image Height Height Of Stoppering Ram Shelf Loading Height Maximum Weight Note: LyoFlux* TDLAS installation increases overall length by 50 cm (19.5 in). SP recommends a 60.7 cm (24 in) clearance around all sides of the unit for serviceability. Product Chamber Shelf AISI 316L stainless steel Condenser Chamber AISI 316L stainless steel Isolation Valve Disc AISI 316L stainless steel AISI 316L stainless steel...