Catalogs >
Soway Tech Limited >
SOWAY LVDT displacement transducers SDVG36-40C

SOWAY LVDT displacement transducers SDVG36-40C
2Pages

Catalog excerpts

SOWAY LVDT displacement transducers SDVG36-40C - 1

Spool Position Sensor Spool Position Sensor SDVG36-8C series, which is based on the principle of LVDT, is highly precise and sensitive. Special sealing pefromed in SDVG36-8C make it operate up to 5076pisg psig. SDVG36-8C has been widely used in hydraulic control, meanwhile become a necessary sensing element of hydraulic control system. 2-wire output of 4-20mA, 3-wire voltage signal Measurements ranging from 2mm to 10mm Linearity < 1% Full Scale Mechanical zeroing( Within 2mm) Propotional Valves Servo Valve Displacement Sensing Directional Control Valves Servo Lever

Open the catalog to page 1

SOWAY LVDT displacement transducers SDVG36-40C - 2

Spool Position Sensor High Pressure Connector Sensor Body Locking Point Zeroing Screw 1. Connect sensor core and spool tightly. and then screw tightly. 2. Put on tube onto the core to make it closely attatched to the valve and then screw tightly. 3. Switch on the sesnsor and connect signal cables. 4. Put on tube for the sensor, install zeroing screw. 5. Turn zeroing screws, move the sensor to find null 6. Finally, tighten the screw in the locking point to

Open the catalog to page 2