OMD-351-O2-CO2
1Pages

{{requestButtons}}

Catalog excerpts

OMD-351-O2-CO2 - 1

OMD-351-O2-CO2 Oxygen Analyzer Product Specification Sheet Online Dual Oxygen & Carbon Dioxide Monitor with Alarms & Battery Backup 0 - 30% O2 Concentration Range 0 - 10,000 PPM CO2 Concentration Range Precision Electrochemical Sensor Technology Barometric Pressure Compensation Two Concentration Relay Contact Alarms Power Failure Alarm Relay Contact Integral Audible Buzzer Alarm Integrated Rechargeable Battery Backup Integral Visual Alarm LEDs Specifications The OMD-351-O2-CO2 Ambient Air Monitor is designed to measure and assure the appropriate levels of both oxygen and carbon dioxide in an enclosed or confined area. Personnel safety is a primary issue in nearly every industry and is magnified within confined spaces where oxygen depletion or asphyxiation due to a leak in an inert gas container can quickly and unexpectedly take place. The OMD-351-O2-CO2 is designed with an easy to use interface with features that are optimized for safety and mitigate the dangers of confined spaces and oxygen deficiency. The analyzer comes with 2 pre-configured oxygen concentration alarms that match the OSHA recommendations of 19.5% and 20.0%. Alarm functionality comes in the form of 2 fully adjustable, form C non-latching, relay contacts, an integral audible buzzer and local LEDs’ loaded into the front of the unit. The unit also has a built in POWER FAIL relay contact. The unit comes standard with an integral battery backup which helps accentuate “brown out” conditions. With this standard feature, power outages will not interfere with a properly working monitor. The standby power source uses a rechargeable lead acid battery. The oxygen sensors used in the OMD-351-O2-CO2 are based on the galvanic electrochemical fuel cell principal. The sensors are selfcontained and minimal maintenance is required - no need to clean electrodes or add electrolyte. Accuracy: < +/- 1% of Full Scale Range* Alarms: (2) Adjustable Relay Contacts (1) Power Fail Relay Contact Analysis Range: 0 - 30% O2 0 - 10,000 PPM CO2 Audible Alarm: Integral Barometric Pressure Compensation: Integral Battery Backup: Rechargeable Calibration: Periodically Dimensions: 9.5x 6.5 x 3.8 inch Display: Large with Backlight Enclosure: Painted Aluminum Output (Analog): 4 - 20mA (1 each O2 / CO2) Power: 100 - 240 VAC Response Time: T90 in 10 Seconds Sensor: PO2-AMB, CO2-AMB Sensor Life: 60 Months (Approximately) Temperature: 0 - 50 deg C Temperature Compensation: Integral Visual Alarms: Panel Mounted LED’s Warranty: 12 months Analyzer & Sensor Weight: 13.0 lbs *Accuracy at constant conditions Optional Configurations: 24V DC Input Power Remote Oxygen Sensor (OMD-351-O2-Remote) O2 Ambient Air Monitor (OMD-351-O2) H2S Ambient Air Analyzer (OMD-351-H2S) CO Ambient Air Monitor (OMD-351-CO) Chlorine Ambient Air Monitor (OMD-351-Cl) Designed, Tested, and Assembled in California, USA 4045 E. Guasti Rd. #203 Ontario, CA 91761 USA : 1-949-398-2879 : sales@sso2.com : www.sso

Open the catalog to page 1

All Southland Sensing Ltd. catalogs and technical brochures

  1. EMD-482

    2 Pages

  2. OMD-501X

    2 Pages

  3. OMD-645

    1 Pages

  4. EMD-485M

    2 Pages

  5. TO2-1L

    1 Pages

  6. TO2-IT

    1 Pages

  7. TO2-IT-A

    1 Pages

  8. TO2-233

    1 Pages

  9. TO2-133

    1 Pages

  10. TO2-2x

    1 Pages

  11. TO2-1x

    1 Pages

  12. PO2-1x

    1 Pages

  13. PO2-13

    1 Pages

  14. PO2-2x

    1 Pages

  15. PO2-160

    1 Pages

  16. PO2-24

    1 Pages

  17. PO2-1120

    1 Pages

  18. TO2-1xL

    1 Pages

  19. TO2-19

    1 Pages

  20. TO2-233-T

    1 Pages

  21. TO2-238-T

    1 Pages

  22. OMD-625

    2 Pages

Archived catalogs

  1. PO2-132

    1 Pages

  2. PO2-133

    1 Pages

  3. PO2-15

    1 Pages

  4. PO2-154

    1 Pages

  5. PO2-253

    1 Pages