Catalog excerpts
SOUTHLAND SENSING OMD-351-H2S Hydrogen Sulfide Analyzer MEASURE. ANALYZE. CONTROL. Product Specification Sheet 0 - 200 PPM Concentration Range Precision Electrochemical Sensor Technology Barometric Pressure Compensation Two Concentration Relay Contact Alarms Power Failure Alarm Relay Contact Integral Audible Buzzer Alarm Integrated Rechargeable Battery Backup Integral Visual Alarm LEDs' Specifications Accuracy: Alarms: Analysis Range: Audible Alarm: Barometric Pressure Compensation: Battery Backup: Calibration: Dimensions: Display: Enclosure: Output (Analog): < +/- 1% of Full Scale Range* (2) Adjustable Relay Contacts (1) Power Fail Relay Contact 0 - 200 PPM Integral Integral Rechargeable Periodically 9.5x 6.5 x 3.8 inch Large with Backlight Painted Aluminum 4 - 20mA The OMD-351-H2S Ambient Air Monitor is designed to measure and assure the appropriate level of hydrogen sulfide in an enclosed or confined area. Personal safety is a primary issue in nearly every industry and is magnified within confined spaces where poisonous gas is present due to a leak in an inert gas container can quickly and unexpectedly take place. The OMD-351-H2S is designed with an easy to use user interface with features that are optimized for safety and mitigate the dangers of confined spaces and hydrogen sulfide. The analyzer comes with 2 pre-configured H2S concentration alarms that match the OSHA recommendations. Alarm functionality comes in the form of 2 fully adjustable, form C non-latching, relay contacts, an integral audible buzzer and local LEDs' loaded into the front of the unit. The unit also has a built in POWER FAIL relay contact. The unit comes standard with an integral battery backup which helps accentuate "brown out" conditions. With this standard feature, power outages will not interfere with a properly working monitor. The standby power source uses a rechargeable lead acid battery. Response Time: T90 in 15 Seconds Sensor Life: 36 Months (Approximately) Temperature Compensation: Integral Visual Alarms: Panel Mounted LED's Warranty: 12 months Analyzer & Sensor *Accuracy at constant conditions Optional Configurations: 24V DC Input Power Remote Oxygen Sensor (OMD-351-O2-Remote) The hydrogen sulfide sensor used in the OMD-351-H2S is based on the galvanic electrochemical fuel cell principal. All h2s sensors are manufactured in house by Southland Sensing Ltd. under a strict quality program. The sensors are self-contained and minimal maintenance is required - no need to clean electrodes or add electrolyte. O2 / CO2 Ambient Air Monitor (OMD-351-O2-CO2) Oxygen Ambient Air Analyzer (OMD-351-O2) CO Ambient Air Monitor (OMD-351-CO) Chlorine Ambient Air Monitor (OMD-351-Cl)
Open the catalog to page 1All Southland Sensing Ltd. catalogs and technical brochures
-
EMD-482
2 Pages
-
OMD-501X
2 Pages
-
OMD-645
1 Pages
-
OMD-351-O2-CO2
1 Pages
-
EMD-485M
2 Pages
-
TO2-1L
1 Pages
-
TO2-IT
1 Pages
-
TO2-IT-A
1 Pages
-
TO2-233
1 Pages
-
TO2-133
1 Pages
-
TO2-2x
1 Pages
-
TO2-1x
1 Pages
-
PO2-1x
1 Pages
-
PO2-13
1 Pages
-
PO2-2x
1 Pages
-
PO2-160
1 Pages
-
PO2-24
1 Pages
-
PO2-1120
1 Pages
-
TO2-1xL
1 Pages
-
TO2-19
1 Pages
-
TO2-233-T
1 Pages
-
TO2-238-T
1 Pages
-
OMD-525 Trace O2 Analyzer
1 Pages
-
OMD-425 Percent O2 Analyzer
1 Pages
-
OMD-625
2 Pages