*mydirectindustry

Catalogs
SOUTHCO
R4 Push-to-Close Latch

R4 Push-to-Close Latch

Product catalog summary

Product Overview: The document provides technical specifications for the R4 Push-to-Close Latch, which features a lift-to-open mechanism and a flush design. It is suitable for single-hole installation and rotary latching.

Material and Finish: The latch is made from glass-reinforced nylon and acetal, available in black.

Performance Details: The latch can handle a maximum working load of 290 N (65 lbf) and operates within a temperature range of -20ºC (0ºF) to 65ºC (150ºF). It has a flammability rating of UL94-HB.

Installation Notes: The maximum tightening torque for mounting screws is 1.4 N·m (12.4 in·lbf). The keeper should be installed using 2 x M4 (No. 8) screws, which are not supplied.

Accessories: The latch comes with a flat key, keyed alike R001, with two keys per ring. The part number for the key is PK-10-01-KR001. The keeper's part number is R4-64-11, and replacement mounting screws are available under part numbers M1-0-33211-24 or R4-0-51779-24.

Part Number Selection: Latch, keeper, and spacers must be ordered separately. The document provides a table for spacer width and the number required based on door thickness. There are four options for handle orientation, with specific part numbers and spacer requirements listed for different door thickness ranges.

Dimensions: The document includes detailed dimensions in millimeters and inches for various components of the latch, such as the handle and cam in open positions, door thickness, and frame dimensions.

Catalog excerpts

Lift-to-open • Flush • Lift-to-open • Single hole installation • Rotary latching Material and Finish Glass reinforced nylon and acetal, black Performance Details Max. working load: 290 N (65 lbf) Operating temperature range: -20°C (0°F) to 65°C (150°F) Flammability rating: UL94-HB Installation Notes Max. tightening torque on mounting screws 1.4 N-m (12.4 in-lbf) Accessories Flat key, keyed alike R001 (2 keys per ring) Part number: PK-10-01-KR001 0 Non-locking 1 Key-locking keyed alike R001 (2 keys supplied) D Door Thickness-*- R4 - 60 - 2 L D - F F _* ^ f] Finish upper housing 5 Black 7 White F Finish lower housing 5 Black 7 White Keeper: Part number R4-64-11 Mounting screws (replacement): Recessed T15 TORX® / Slot M4.2 x 1.4: Part number: M1-0-33211-24 or R4-0-51779-24 Part Number Selection Order latch, keeper and spacers separately See table for spacer width and number required by door thickness Part Number Dimensions in millimeters (inch) unless otherwise stated INFO CLIC

Open the catalog to page 1

R4 Push-to-Close Latch

R4 Push-to-Close Latch

Catalog excerpts

All SOUTHCO catalogs and technical brochures

Archived catalogs