Fixed core Non-Sealed Pin Tumbler • 7-pin tumbler lock security Door thickness • Keyed alike, keyed differently or custom key code options H Housing • Cams sold separately length Material and Finish ACTUAL SIZE Frame Cam forward Straight cam Cam reversed Stud length Zinc alloy, chrome plated Performance Details B - Key Removable in Locked / Unlocked Positions L - Key Removable in Locked Positions Only Average ultimate load on cam: 645 N (145 lbf) Installation Notes R 01 (Clockwise) Locked Position Unlocked Position Locked Position Unlocked Position R 09 (Counter-Clockwise) Unlocked Position R 09 (Counter-Clockwise) Locked Position Locked Position Unlocked Position Part Number Selection Lock part number (no cam) Order lock and cam separately Cam page 195 To select cam part number see grip table page 195 R Rotation 01 Clockwise 09 Counter-clockwise K Key removal B Locked / unlocked removal L Locked removal only PT - 1 - H C1 R - 20 K - KC H Housing Length Number Housing Length Stud Length Dimensions in millimeters (inch) unless otherwise stated KC Key Code KA Keyed alike T0001 (2 keys supplied) KD Keyed differently 50 key codes (T0001 to T0050) provided in a non-master key system (2 keys supplied)

Cams & installation Installation Notes 1. Install mounting nut and tighten to 5 Nm (44 inlbf) Max. 2. Install cam to assembly. Properly orient for rotation and grip. 3. Install lockwasher and cam mounting nut. Tighten to 2 Nm (18 inlbf). Max. door thickness (see table) Material and Finish Cam Grip Housing Length Number Cam Part Number Cam Reversed PT-T409 Also use the online configurator at www.southco.com ACTUAL SIZE Steel plated 1. In the TAN section, locate the cam grip calculated for your application. If your grip falls between two values, use the higher value. Notes: For cam grips that can...