*mydirectindustry

Catalogs
SOUTHCO
DM - Monosert & Duosert Inserts

DM - Monosert & Duosert Inserts

Product catalog summary

Overview: This document provides technical specifications for DM Inserts, specifically the MonoSert and DuoSert rack attach systems. It includes details on dimensions, materials, installation notes, and part numbers.

Specifications:

Dimensions: All dimensions are provided in millimeters (inches). The outer panel dimensions range from 1.2 mm (.047 inches) to 4.5 mm (.177 inches).
Materials and Finish: MonoSert is made of steel with a zinc plating, while DuoSert is made of zinc alloy and stainless steel with a natural finish.

Installation Procedures:

MonoSert: Maximum tightening torque is 2 N·m (17.7 in·lbf). The installation requires an M6 x 1 screw.
DuoSert: Maximum tightening torque is 10 N·m (88.5 in·lbf). The maximum panel thickness is 1 - 1.2 mm (.039 - .047 inches). A flat blade screwdriver is recommended for installation.

Part Numbers:

MonoSert: DM-10-10216-10
DuoSert: DM-95-10-12-11 (Receptacle only, screw not supplied)

Additional Information: For more details on variety, part numbers, installation, and specifications, refer to the website www.southco.com/DM.

Catalog excerpts

MonoSert rack attach • Front install insert for rack attach applications Material and Finish Steel, zinc plated Installation Notes ACTUAL SIZE Max. tightening torque: 2 Nm (17.7 inlbf) M6 x 1 screw M6 x 1 screw Outer panel Outer panel Frame fixed Frame fixed Alternative Installation Outer Outer panel assemblypanel assembly Frame fixed Frame fixed Part Number See table Other options available. For complete details on variety, part numbers, installation and specification, go to Dimensions in millimeters (inch) unless otherwise stated

Open the catalog to page 1

DuoSert rack attach • Front install insert for rack attach applications Material and Finish Zinc alloy and stainless steel, natural ACTUAL SIZE Max. tightening torque: 10 Nm (88.5 inlbf) Max. panel thickness: 1 - 1.2 (.039 - .047) Recommended installation tool requires a flat blade screwdriver Part Number See table Receptacle only. (Screw not supplied) Other options available. For complete details on variety, part numbers, installation and specification, go to Dimensions in millimeters (inch) unless otherwise stated

Open the catalog to page 2

DM - Monosert & Duosert Inserts

DM - Monosert & Duosert Inserts

Catalog excerpts

All SOUTHCO catalogs and technical brochures

Archived catalogs