*mydirectindustry

Catalogs
SOUTHCO
D7 - DZUS® series

D7 - DZUS® series

Product catalog summary

Overview: This document provides technical specifications and installation guidelines for D7 DZUS® Pilot and Arrow Quarter-Turn Fasteners, including studs, washers, receptacles, and self-ejecting studs. It details material compositions, dimensions, and part numbers for various configurations based on panel and frame thickness.

Specifications:

Studs and Washers: Made of steel, zinc plated with chromate, and neoprene washers. Selection is based on panel thickness.
Receptacles: Made of spring steel with zinc phosphate finish. Selection is based on frame thickness.
Arrow Fasteners: Made of black acetal with a flammability rating of UL94-HB and ASTM E-162 Flame Spread Index of 130.

Installation Procedures:

Self-Clinching Products: Installation involves pressing the fastener into a prepared hole, ensuring the panel material flows into the retaining groove.
Quarter-Turn Fasteners: Installation involves pressing the receptacle into the panel, inserting the stud, and turning to latch or unlatch.

Installation Guidelines:

Material Hardness: Panel material must not exceed recommended hardness to ensure proper installation.
Hole Preparation: Holes should be drilled, punched, or cast with sharp edges and within specified diameters.
Panel Thickness: Must meet or exceed minimum recommendations to prevent deformation.
Installation Force: Requires even distribution of force; avoid using hammers.
Timing: Install after plating or finishing the panel, ensuring hole specifications are met beforehand.

Critical Information: Proper selection of part numbers based on panel and frame thickness is crucial for ensuring compatibility and performance. Installation must adhere to guidelines to prevent damage and ensure retention strength.

Catalog excerpts

82 85 D8 D9 D1 D4 D5 D7 NY Material and Finish Studs: Steel, zinc plated plus chromate Washer: Neoprene, black Notes Select stud and washer part number from table based on your panel thickness P Part Number See table Order stud and washer separately D7 DZUS® Pilot Quarter-Turn FastenersStuds Studs Material and Finish Steel, zinc plated and thermoplastic black Notes Select stud and washer part number from table based on your panel thickness P Self-Ejecting Studs Retainer, Plastic Part Number See table Stud, cup and spring shipped pre-assembled Order retainer separately Part Number Dimensions in millimeters (inch) unless otherwise stated DZUS southed CONNECT • CREATE - INNOVATE

Open the catalog to page 1

D7 DZUS® Pilot Quarter-Turn FastenersReceptacles Material and Finish Spring steel, zinc phosphate Notes Select receptacle based on frame thickness F Part Number See table Lateral Tolerance Material and Finish Spring steel, zinc phosphate Notes Select receptacle based on frame thickness F southco’ CONNECT • CREATE • INNOVATE Part Number See table Dimensions in millimeters (inch) unless otherwise stated

Open the catalog to page 2

D7 DZUS® Arrow Quarter-Turn FastenersAssembly • Surface install • Panel mounted assembly Material and Finish Acetal, black Performance Details Flammability rating: UL94-HB ASTM E-162 Flame spread Index: 130 D7 D7 Arrow Installation notes 200 series: 1. Press receptacle into outer panel. 2. Press stud into receptacle. 3. Press and turn stud to latch 4. Turn stud 90 degree to unlatch. 2001 series: 1. Separate Stud and receptacle from runner. 2. Press receptacle into outer panel. 3. Press stud into receptacle. 4. Press and turn stud to latch 5. Turn stud 90 degree to unlatch Part Number See table 200...

Open the catalog to page 3

Installation Guidelinesfor SOUTHCO Self-Clinching products Self-clinching product installation is offered on side these Punch Ferrule ® of panel Rollover SOUTHCO products, making them easy-to-use captive Area of material that Material panel fasteners: moves into groove thickness Panel • Captive Screws Die side Mounting hole of panel • Receptacles for Quarter-turn Fasteners Mounting hole • Receptacles for Fast-lead Thread Screws diameter Panel edge • Spring-loaded Plungers • Captive Nuts Ferrule • Threaded Area of material Inserts When pressed into a properly prepared hole, self-clinching captive...

Open the catalog to page 4

D7 - DZUS® series

D7 - DZUS® series

Catalog excerpts

All SOUTHCO catalogs and technical brochures

Archived catalogs