Catalogs >
SOUTHCO >
D1 - DZUS®

D1 - DZUS®
4Pages

Catalog excerpts

D1 DZUS® Dart Quarter-Turn Fasteners Studs, Glass-filled nylon Material and Finish Glass-filled nylon, black H Head Styles - Tool Actuated H Head Styles - Hand Actuated Adjustment formula Slot Recess Slotted Recess Knob Add 2.3 (.090) to panel thickness and recalculate your TMT when using self-ejecting stud assembly To select correct fastener: 1. Select receptacle Choose a receptacle from pages 475-477 2. Select retainer and accessories Calculate the total material thickness (TMT) using the formula given for the receptacle selected. Find the range of TMT using the stud length selection table (right) using the column (A, B, C, or D) given for the receptacle selected. ACTUAL SIZE Self-Ejecting Stud Assembly Self-ejecting stud Ø 12.7 (.50) With ejecting Retainer assembly Ø 10.32 (.406) Without ejecting assembly 3. Specify stud length Standard Stud Assembly from page 477 and note any adjustment values Stud Length Table A 4. Complete the stud part number by specifying the head style H , stud length K , and material M Example: For rivet-on D1-004-001-010 use column A For TMT value calculated as 5.2 (.206), K = 55 For slotted head style, completed part number: D1-004-055-030 A complete example can be found on page 435. Part Number Selection H Head style 004 Slot recess 125 Wing 166 Hex recess 444 Slot recess knob D1 - H - K - 030 SE K Length Enter number from selection table above Dimensions in millimeters (inch) unless otherwise stated SE Self-ejecting SE Self-ejecting assembly Omit for standard stud

Open the catalog to page 1

D1 DZUS® Dart Quarter-Turn Fasteners Receptacles, Acetal Acetal, black Notes After selecting receptacle use stud selection letter A and follow instruction on page 474 TMT = P + F + (Retainer adjustment value) ACTUAL SIZE Part Number Snap-In Back Load Stud Selection Column Acetal black Notes Utilize stud selection column indicated when choosing a stud length from the stud length table on page 474 Part Number TMT = P + F + TMT = P + F TMT = P + F + Compressed gasket (when gap > 2.5 (.098)) 1.40 (.055) + (Retainer adjustment value) ACTUAL SIZE Part Number Part Number Stud Selection Column...

Open the catalog to page 2

D1 DZUS® Dart Quarter-Turn Fasteners Receptacles, Acetal Mini Snap-In - Back Load Acetal, black ACTUAL SIZE TMT = P + F + TMT = P + F TMT = P + F + Compressed gasket (when gap > 2.5 (.098)) 1.4 (.055) + (Retainer adjustment value) Part Number See table Notes Utilize stud selection column indicated when choosing a stud length from the stud length table on page 474 F Frame Thickness Part Number Stud Selection Column Mini Snap-In - Front Load Part Number See table F Frame Thickness Part Number Stud Selection Column Utilize stud selection column indicated when choosing a stud length from the...

Open the catalog to page 3

D1 DZUS® Dart Quarter-Turn Fasteners Receptacles · Retainers · Accessories Acetal, black TMT TMT TMT = P + F TMT = P + F + TMT = P + F + Compressed gasket (when gap > 2.00 (.079)) 2.00 (.079) TMT Part Number Retainer Split Stud Selection Column Self-Ejecting Springs Part Number See table Notes Utilize stud selection column indicated when choosing a stud length from the stud length table on page 474 Material and Finish See table Part Number See table Notes Type Part Number Adjustment Value Retainer split Acetal, black Self-ejecting springs Stainless steel Self-ejecting springs Stainless...

Open the catalog to page 4

D1 - DZUS® 4Pages

Catalog excerpts

All SOUTHCO catalogs and technical brochures

D1 - DZUS®
4Pages