video corpo

D1 - DZUS® series
5Pages

{{requestButtons}}

Catalog excerpts

D1 - DZUS® series - 1

D1 DZUS® Dart Quarter-Turn FastenersStuds, Glass-filled nylon 82 Material and Finish Glass-filled nylon, black Adjustment formula Add 2.3 (.090) to panel thickness and recalculate your TMT when using self-ejecting stud assembly H Head Styles - Tool Actuated Slot Recess Hex Recess H Head Styles - Hand Actuated Slotted Recess Knob Wing To select correct fastener: 1. Select receptacle Choose a receptacle from pages 411-413 Standard Stud Assembly Self-Ejecting Stud Assembly 2. Select retainer and accessories from page 413 and note any adjustment values 3. Specify stud length Calculate the total material thickness (TMT) using the formula given for the receptacle selected. Find the range of TMT using the stud length selection table (right) using the column (A, B, C, or D) given for the receptacle selected. 4. Complete the stud part number by specifying the head style H, stud length K, and material M Example: For rivet-on D1-004-001-010 use column A For TMT value calculated as 5.2 (.206), K = 55 For slotted head style, completed part number: D1-004-055-030 A complete example can be found on page 377. Part Number Selection Stud Length Table Self-ejecting stud 0 12.7 (.50) With ejecting assembly H Head style -<— 004 Slot recess 125 Wing 166 Hex recess 444 Slot recess knob Enter number from selection table above SE Self-ejecting SE Self-ejecting assembly Omit for standard stud only INFO cue www.southco.com/D1 Dimensions in millimeters (inch) unless otherwise stated southco CONNECT • CREATE - INNOVATE

Open the catalog to page 1
D1 - DZUS® series - 2

D1 DZUS® Dart Quarter-Turn FastenersReceptacles, Acetal 41 TMT = P + F TMT = P + F + (Retainer adjustment value) Material and Finish Acetal, black Notes After selecting receptacle use stud selection letter A and follow instruction on page 410 Part Number See table Snap-In Back Load Material and Finish Acetal black Notes Utilize stud selection column indicated when choosing a stud length from the stud length table on page 410 Compressed gasket (when gap > 2.5 (.098)) 1.40 (.055) + (Retainer adjustment value) Part Number See table DZUS southed CONNECT ■ CREATE ■ INNOVATE Dimensions in...

Open the catalog to page 2
D1 - DZUS® series - 3

Quarter-Turn Fasteners Material and Finish Acetal, black Mini Snap-In - Back Load Compressed gasket (when gap > 2.5 (.098)) 1.4 (.055) + (Retainer adjustment value) Part Number See table Notes Utilize stud selection column indicated when choosing a stud length from the stud length table on page 410 Material and Finish Acetal, black Mini Snap-In - Front Load (Retainer adjustment value) Part Number See table Notes Utilize stud selection column indicated when choosing a stud length from the stud length table on page 410 Dimensions in millimeters (inch) unless otherwise stated southco...

Open the catalog to page 3
D1 - DZUS® series - 4

Clip-On D1 DZUS® Dart Quarter-TurnReceptacles • Retainers Fasteners• Accessories Gasket P'HK Material and Finish Acetal, black Compressed gasket (when gap > 2.00 (.079)) 2.00 (.079) Part Number See table Notes Utilize stud selection column indicated when choosing a stud length from the stud length table on page 410 D7 NY Retainer Split Self-Ejecting SpringsSelf-Ejecting Cup Material and Finish See table CONNECT • CREATE ■ INNOVATE Dimensions in millimeters (inch) unless otherwise stated Part Number See table Notes Adjustment value: When using accessories the components increase...

Open the catalog to page 4
D1 - DZUS® series - 5

Installation Guidelinesfor SOUTHCO Self-Clinching products Self-clinching product installation is offered on side these Punch Ferrule ® of panel Rollover SOUTHCO products, making them easy-to-use captive Area of material that Material panel fasteners: moves into groove thickness Panel • Captive Screws Die side Mounting hole of panel • Receptacles for Quarter-turn Fasteners Mounting hole • Receptacles for Fast-lead Thread Screws diameter Panel edge • Spring-loaded Plungers • Captive Nuts Ferrule • Threaded Area of material Inserts When pressed into a properly prepared hole, self-clinching...

Open the catalog to page 5

All SOUTHCO catalogs and technical brochures

  1. P9

    1 Pages

  2. MA

    6 Pages

  3. 09

    9 Pages

  4. 64

    8 Pages

  5. C2

    6 Pages

  6. E3

    31 Pages

  7. A3

    4 Pages

  8. D1 - DZUS®

    4 Pages

  9. C5

    2 Pages

  10. C2

    2 Pages

  11. G6 Hinge

    2 Pages

  12. F6 series

    4 Pages

  13. R6 series

    3 Pages

  14. M5 series

    1 Pages

  15. 47, 4C series

    36 Pages

  16. 52 series

    7 Pages

  17. 5x series

    11 Pages

  18. N7 series

    2 Pages

  19. 5T series

    1 Pages

  20. 56 series

    4 Pages

  21. NY - NYLATCH

    2 Pages

  22. NY-N6

    2 Pages

  23. B4 Handle

    1 Pages

  24. GA - Gaskets

    1 Pages