Catalogs >
SOUTHCO >
C2

C2
2Pages

Catalog excerpts

Lever latch Low profile when latched Easy grip adjustment Push button actuation Optional Sealing Zinc alloy, powder coated or chrome plated and steel, zinc plated Maximum static load: 200 N (45 lbf) Installation Notes * For door thickness greater than 5 (.20) calculate screw length using the following formula: Door thickness + 12 (.47) M5 adjusting screws Lever in raised (open) position *Serrated Mounting Screw M5 x 16 Sealing Notes For sealed option, NEMA 4 / IP65 sealing is achieved by using the supplied flange gasket. B when adjusted to maximum grip Lever in raised (open) position Performance Details B when adjusted to maximum grip A Raised trigger (flush version available) Optional keylock or tool access (available with raised trigger only) Mounting bracket Housing Door Thickness 1 (.04) Minimum 8 (.32) Maximum Door Thickness 1 (.04) Minimum 5 (.20) Maximum Frame Door ACTUAL SIZE Accessories Rubber Bumper: Part Number: C2-25-301-82 (reduces min. and max. grip by 1.6 (0.06) ) Part Number Selection ________________________________________________________________________________ See table Notes For lock core selection and a complete overview of the SOUTHCO® Key-Choice System see www.southco.com Other options available. For complete details on variety, part numbers, installation and specification, go to L Lock style 1 Non-locking raised trigger 2 Key-locking raised trigger keyed CH751 (two flat keys supplied) 3 Flush trigger non-locking 4 4 (.16) Hex recess raised trigger 10 No. 2 Phillips raised trigger 13 Locking without lock core (see page 158 for lock core options) 14 Railway standard F Finish 1 Textured chrome 5 Black powder coated S Sealing Option 3 Non-sealed 4 Sealed Dimensions in millimeters (inch) unless otherwise stated P Packaging option 3 Latches are sold layer packed Omit for individually packaged latches.

Open the catalog to page 1

Lever latch · Access indicator of latch access Visual Indicator • eature indicates that latch F has been accessed • Easy grip adjustment • Push button actuation • Integrated bumper screw B when adjusted to maximum grip Green – Unaccessed Red – Accessed (Operated) Panel Preparation Material and Finish Zinc alloy, powder coated or chrome plated and steel, zinc plated ACTUAL SIZE * For door thickness greater than 5 (.20) calculate screw length using the following formula: Door thickness + 12 (.47) Required to reset red indicator back to green Part number: C2-26-301-05 Installation Notes NEMA 4...

Open the catalog to page 2

C2 2Pages

Catalog excerpts

All SOUTHCO catalogs and technical brochures

C2
2Pages