Tilt and swivel · Compact • Intuitive grab and move operation enhances the user experience No knobs or tools required to reposition the display Consistent repeatable operation • Factory assembled and ready for use Swivel Torque Product Detail Panel Thickness X 200 Range of Motion, Reverse 1100 Range of Motion, Forward Tilt Torque Installation Notes AV Series Dynamic Mount 1. Determine desired mounting location 2. Attach using M8 nut (not supplied) as shown Installation Caution: Because of the wide variety of panel materials, it is the installer’s responsibility to ensure that the materials and structure to which the product 200 Range of is mounted and Motion, Reverse the hardware selected will provide adequate support. 1100 Range of Motion, Forward 3. Attach display mounting bracket using Tilt Torque recommended self-tapping screws or equivalent Display case back or mounting plate (not supplied). Customized mounting plates available, contact Southco for details. Self Tapping Screw (See Table for Recommended Part Number) M8 Nut (Not Provided, Southco Part Number E3-0-23971-07 or Equivalent) Other options available. For complete details on variety, part numbers, installation and specification, go to Dimensions in millimeters (inch) unless oth

Tilt and swivel • Compact Specification and Selection Step 1 Determine display weight and distance (d) from mounting surface to center of gravity. • Smooth operation enhances the user experience • Adjust the display without knobs or tools • Holds securely in every position Display Weight Glass-filled nylon, black; Stainless steel Step 2 Use chart below to confirm suitable display weight. For weights outside the shaded area, consider SOUTHCO® AV-D30 series display mounts. AV-C20 Series - Capacity vs. Cg Distance Performance Details Cycle performance: 20,000 cycles Max dynamic working load: 100...

AV Series Dynamic Mount Product Detail • Intuitive grab and move operation enhances the user experience No knobs or tools required to reposition the display Precise control of operating effort ensures ideal “feel” and eliminates “drift” Holds securely, even in applications with dynamic loading • Consistent repeatable operation • Factory assembled and ready for use Shipping Clip Tilt Display Other options available. For complete details on variety, part numbers, installation and specification, go to VESA® MIS-D, 100, C VESA and VESA MOUNTING COMPLIANT are registered trademarks of Video Electronics...

Tilt and swivel Specification and Selection Step 1 Determine display weight and distance (d) from mounting surface to center of gravity. Step 2 Use chart below to select model (101, 102 or 103). Display Weight V ** • Smooth operation enhances the user experience • Adjust the display without knobs or tools • Holds securely in every position Material and Finish Aluminum alloy, powder coated Performance Details Cycle performance: 20,000 cycles within ± 20% of static torque specification Maximum dynamic working load: Model 101 and 103: 66 N (15 lbf) Model 102: 98 N (22 lbf) Average ultimate load:...

AV Series Dynamic Mounting Arm Tilt and swivel · Single arm · Double arm • Intuitive grab and move operation enhances the user experience knobs or tools required to No reposition the display Precise control of operating effort ensures ideal “feel” and eliminates “drift” Holds securely, even in applications with dynamic loading • Consistent repeatable operation • ully enclosed for optimum F cleanability • nap-on wire management S cover • Factory assembled and ready for use Mounting Options Wall Mount Table Mount Optional wire notch Optional wire notch Display Mounting Plate 115 (4.53) 100 (3.94)...

AV Series Dynamic Mounting Arm Tilt and swivel · Single arm · Double arm • Smooth operation enhances the user experience • djust the display A without knobs or tools • Holds securely in every position Other options available. For complete details on variety, part numbers, installation and specification, go to Dimensions in millimeters (inch) unless otherwise stated

AV Series Dynamic Mounting ArmTilt and swivel • Single arm • Double arm Material and Finish Aluminum alloy, powder coated Performance Details Cycle performance: 20,000 cycles. See trade drawing for details. Note: Double Arm not recommended for displays over 5.4 kg (12 lb) Specification and Selection d i Step 1 Determine display weight and distance (d) from mounting surface to center of gravity. Center of Gravity Max. dynamic working load: Model 101, 103: 70N (15.7lbf) Model 102: 100N (22.5lbf) Average ultimate load: Tilt/Swivel: 1845N (415lbf) Single Arm: 1600N (360lbf) Double Arm: 755N (170lbf)...

AV Series Dynamic Mounting Arm Tilt and swivel · Single arm · Double arm • Smooth operation enhances the user experience • djust the display A without knobs or tools • Holds securely in every position Snap-on wire retaining cover Use display manufacturer’s recommended hardware (not provided) Other options available. For complete details on variety, part numbers, installation and specification, go to Dimensions in millimeters (inch) unless otherwise stated

AV Series Dynamic Mounting Arm Tilt and swivel · Single arm · Double arm · Heavy Duty • Intuitive grab and move operation enhances the user experience knobs or tools required to No reposition the display Precise control of operating effort ensures ideal “feel” and eliminates “drift” Holds securely, even in applications with dynamic loading • Consistent repeatable operation • ully enclosed for optimum F cleanability • nap-on wire management S cover • Factory assembled and ready for use Mounting Pattern VESA® MIS-D, 100, C VESA and VESA MOUNTING COMPLIANT are registered trademarks of Video Electronics...