Southco® Drive (Blind) Rivets

Product catalog summary

Overview: This document provides detailed specifications and part numbers for Southco® Drive (Blind) Rivets, including general-purpose, masonry, trailer liner, and tamper-resistant rivets. It includes information on dimensions, materials, and installation procedures.

Specifications:

Rivet diameters range from Ø 3.2 mm (1/8") to Ø 9.5 mm (3/8").
Materials used include Aluminum and Stainless Steel for pins.
Rivets are available with Universal, Full Brazier, and 100° CSK heads.

Part Numbers: The document lists numerous part numbers for different rivet types and sizes, indicating their availability and specific applications.

Installation Procedures:

Masonry Rivets: Use a carbide-tipped spiral masonry drill, insert the rivet, and drive the pin flush with the rivet head using a hammer.
Trailer Liner Rivets: Designed for fast and efficient trailer lining with a low-profile, non-snag head design.

Material and Finish:

Rivets are made from 2117 and 5052 Aluminum, with pins made from 7075 and 5556 Aluminum.

Key Features:

Large diameter Aluminum Drive Rivets are available for specific applications.
Tamper-resistant rivets feature a recessed pin to resist tampering and are available in two diameters and four grip ranges.

Catalog excerpts

PART NUMBERS Drive (Blind) Rivets General Purpose * These part numbers can be used in Masonry, see next page for installation instructions. 328 • Products identified with this symbol are stocked subject to prior sale in one or more of our global locations. If unavailable from our facility nearest you, allow for shipping time from another facility.

Open the catalog to page 1

Material and Finish 0 3.2 (.125) and 0 4 (.156) RIVET: Aluminum, natural. PIN: 302 Stainless steel, natural. 0 4.8 (.188) and 0 6.4 (.250) RIVET: Aluminum, natural. PIN: 7075 Aluminum, natural. 0 7.9 (.313) and 0 9.5 (.375) RIVET: Aluminum, natural. PIN: 7075 Aluminum, natural. * See page 321 for rivet selection and application information. Installation for Masonry Rivets (With only a drill and a hammer) 1. Use a carbide tipped spiral masonry drill, same diameter as rivet [6.4 (.250) or 4.8 (.188)]. Drill to any depth, deep enough to permit full insertion of rivet. 2. Insert rivet through material...

Open the catalog to page 2

Southco® Drive (Blind) Trailer Liner Rivets • Fast, efficient trailer lining • Low profile, non-snag head design • Six sizes *Grip equals total thickness of all layers to be fastened. Material and Finish RIVET: 2117 Aluminum, natural. PIN: 7075 Aluminum, natural. Southco® Drive (Blind) Rivets Tamper-resistant, Tamper-evident Rivets • Recessed pin resists being driven through or drilled out • Removal is difficult and time consuming • Non-snag head design • Available in 2 diameters and 4 grip ranges Material and Finish RIVET: 5052 Aluminum, natural. PIN: 5556 Aluminum, natural. OUTER Drive (Blind)...

Open the catalog to page 3

Southco® Drive (Blind) Rivets

Southco® Drive (Blind) Rivets

Catalog excerpts

All Southco Asia Ltd catalogs and technical brochures

Archived catalogs