24 - Loquets à compression autoréglables à poignée en T affleurants24 - Flush T-Handle Style Self-Adjusting Compression Latches
3Pages

Flush T-handle · Adjustable grip Grip range • Concealed mounting type Material and Finish Zinc alloy and steel, zinc plated or stainless steel Performance Details Installation Notes Maximum tightening torque of mounting nuts not to exceed 2.8 Nm (25 inlbf) ACTUAL SIZE Part Number With Mounting Studs See page 130 Other options available. For complete details on variety, part numbers, installation and specification, go to 2 Holes, Ø 6.5 (.26) in actuator for attaching rods 17.5 (.69) Cam Cup Lock assembly option Maximum static load: 445 N (100 lbf) Cup and bracket polished stainless steel. Handle zinc chrome plated Cup and bracket steel dacrotized. Handle zinc dacrotized Locking keyed alike CH751 supplied Non-locking environmentally sealed 69 Cam Latch Arrowhead · Detent design · Adjustable grip G Grip range • rrow indicates cam A orientation • Single hole installation • Detented design • Adjustable grip Lock washers Material and Finish Nylon and steel, zinc plated Performance Details Small size working load: 44 N (10 lbf) Medium size working load: 220 N (50 lbf) Large size working load: 330 N (75 lbf) Other options available. For complete details on variety, part numbers, installation and specification, go to Lock nuts Part Number Dimensions in millimeters (inch) unless otherwise stated

Southco® Compression Latches Flush T-handle Series, Adjustable-grip Style • Turn handle 90° to latch or unlatch • T-handle folds away • An extra turn adjusts the amount of compression applied GRIP RANGE Panel Preparation Material and Finish For all models PAWL: Steel, zinc plate, chromate, plus sealer. WASHER: Steel. RETAINER: 1010 Steel. BUSHING: Low carbon steel. MOUNTING NUTS and LOCKWASHERS: Steel. Components listed above are zinc plated plus chromate dip. PAWL SPRING: 304 Stainless steel, passivated. GROOVE PIN: 1112 Steel, zinc plate, chromate plus sealer. CONICAL SPRING: Spring wire,...

Flush T-handle Series, Fixed-grip Style • T-handle folds away • Use with single-, 2-, or 3-point latching (See pages 160 to 164) • Keylocking version available • Available with or without mounting studs Grip Range No. 24 Flush Latches with mounting studs (mounting nuts and lockwashers supplied) FLANGE GASKET OPTIONAL • 7.9 (.31) MAX. panel thickness • Tightening torque of mounting nuts not to exceed 2.8 N*m or 25 in.-lbs. Material and Finish For all models ACTUATOR and PAWL: 1010 Steel, zinc immersion coating. GROOVE PIN :1112 Steel, zinc plate, chromate plus sealer. CONICAL SPRING: Steel,...