The SLD1332V is a high power, visible light laser diode that has Quantum Well (QW) structure. 500mW high power is achieved by this QW structure. • High power Recommended optical power output: Po • High-optical power density: 0.5W/100um (Emitting line width) AIGalnP Quantum Well structure laser diode Absolute Maximum Ratings • Optical power output • Reverse voltage • Storage temperature Operating Lifetime MTTF 10,000H (effective value) at Po = 0.5W, Tc = 25°C This warranty period shall be 90 days after receipt of the product or 1,000 hours operation time whichever is Sony Quality Assurance Department shall analyze any product that fails during said warranty period, and if the analysis results show that the product failed due to material or manufacturing defects on the part of Sony, the product shall be replaced free of charge. Laser diodes naturally have differing lifetimes which follow a Weibull distribution. Connection Diagram Pin Configuration Bottom View Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.

Electrical and Optical Characteristics (Tc = 25°C) Tc: Case temperature

SLD1332V Notes on Operation Care should be taken for the following points when using this product. (1) This product corresponds to a Class 4 product under IEC60825-1 and JIS standard C6802 "Laser Product Emission Safety Standards". LASER DIODE LASER DIODE This product complies with 21 CFR Part 1040.10 and 1040.11 LASER RADIATION AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION MAXIMUM OUTPUT WAVELENGTH OVER 1 W 600 - 950 nm CLASS IV LASER PRODUCT Sony Corporation AVOID EXPOSURE Laser radiation is emitted from this aperture. 1-7-1 Konan, Minato-ku,Tokyo 108-0075 Japan (2) Eye protection...

SLD1332V (6) Environment-related Substances to be Controlled No substances classified at Level 1 (immediate ban) of Sony Technical Standard, SS00259,“Management regulations for the Environment-related Substances to be Controlled”. The excerpt from SS-00259 is introduced on following URL. http://www.sony.net/SonyInfo/procurementinfo/ss00259/ –4–

SLD1332V Package Outline Unit: mm M-248 (LO-11) Reference Slot 0.4 1.0 3 2 1 Photo Diode 0 φ9.0 – 0.015 φ7.7 MAX Reference Plane LD Chip 3 – φ0.45 7.0 MAX ∗2.45 φ3.5 1.5 3.4 MAX 0.6 MAX φ6.9 MAX Window Glass ∗Optical Distance = 2.55 ± 0.05 PCD φ2.54 SONY CODE PACKAGE MASS M-248 1.2g EIAJ CODE JEDEC CODE –5– Sony Corporation