IMX290LLR Diagonal 6.46 mm (Type 1/2.8) Approx. 2.13M-Effective Pixel Monochrome CMOS Image Sensor IMX178LLJ Diagonal 8.92 mm (Type 1/1.8) Approx. 6.44M-Effective Pixel Monochrome CMOS Image Sensor IMX226CLJ Diagonal 9.33 mm (Type 1/1.7) Approx. 12.40M-Effective Pixel Monochrome CMOS Image Sensor 2M, 6M, and 12M Monochrome CMOS Image Sensors for Industrial Applications Sony Semiconductor Solutions Corporation has commercialized the "IMX290LLR", "IMX178LLJ", and "IMX226CLJ" monochrome back-illuminated CMOS image sensors for industrial camera applications. These image sensors use the STARVIS™ technology, which was originally developed for security cameras. 2M-, 6M-, and 12M-pixel image sensors can be sensitivity monochrome image sensors selected according to the application. In addition to the basic angle of view, the drive mode can be changed to HD, 5M, and 4K according to the imaging subject. These products also support functions that enable imaging in accordance with the surrounding environment, such as the global reset function and multiple exposure function. *Exmor R is a trademark of Sony Corporation. The Exmor R is a Sony's CMOS image sensor with significantly enhanced imaging characteristics including sensitivity and low noise by changing fundamental structure of ExmorTM pixel adopted column parallel A/D converter to back-illuminated type. reset function *STARVIS is a trademark of Sony Corporation. The STARVIS is back-illuminated pixel technology for CMOS image sensors for surveillance camera applications. It features a sensitivity of 2000 mV or more per 1 μm2 (color product, when imaging with a 706 cd/m2 light source, F5.6 in 1 s accumulation equivalent), and realizes high picture quality in the visible-light and near infrared light regions. High sensitivity monochrome image sensors Products that support monochrome imaging were prepared by making use of the low illumination characteristics of the IMX290LQR*1, IMX178LQJ*2, and IMX226CQJ*3 color image sensors, which are equipped with the STARVIS technology that is highly regarded by customers as image sensors for security cameras. - Diagonal 6.46 mm (Type 1/2.8) Approx. 2.13M-Effectiv Pixel: IMX290LLR -Diagonal 8.92 mm (Type 1/1.8) Approx. 6.44M-Effective Pixel: IMX178LLJ -Diagonal 9.33 mm (Type 1/1.7) Approx. 12.40M-Effective Pixel: IMX226CLJ The angle of view can be selected according to the application. (Photograph 1, Photograph 2, Photograph 3) *1: See the New Product Information released in February 2015. *2: See the New Product Information released in September 2013. *3: See the New Product Information released in February 2014. Multiangle Various angles of view are available for each sensor in addition to all-pixel output. The IMX290LLR can select all-pixel (Full HD) output or HD output. The IMX178LLJ can select all-pixel 6M output or 5M output with an aspect ratio of 4:3, 5:4, or 16:9 in accordance with the application. The IMX226CLJ can select all-pixel 12M output or 4K output, and is capable of imaging at 60 frame/s in ADC 10-bit mode when 4K output is selected. (Table 3-1, Table 3-2, Table 3-3) Various functions The IMX290LLR and IMX178LLJ support multiple exposure drive, and the exposure time can be changed for each frame. The IMX290LLR also supports the DOL (Digital Overlap)-type HDR (High Dynamic Range) function, and can realize multiple exposures with little exposure time difference. These products are also equipped with the global reset function required by cameras for industrial applications, and use together with a flash makes it possible to obtain images with low distortion. The IMX178LLJ and IMX226CLJ use a low-voltage LVDS, and the number of channels used can be reduced according t o t h e f r a m e r a t e . T h e I M X 2 9 0 L L R c a n s e l e c t f ro m low-voltage LVDS, MIPI CSI-2, or CMOS parallel output interfaces in accordance with the interface to be co

＜Photograph 1＞ Condition: 2000 lx F5.6 (Exposure time 17.5 ms, Internal gain 0 dB) Condition: 2000 lx F5.6 (Exposure time 25 ms, Internal gain 0 dB) Condition: 2000 lx F5.6 (Exposure time 32 ms, Internal gain 0 dB) ＜Table 1＞ Device Structure Item Output image size Diagonal 6.46 mm (Type 1/2.8) Full HD Diagonal 4.31 mm (Type 1/4.2) HD Diagonal 8.92 mm (Type 1/1.8) all-pixel Diagonal 7.83 mm (Type 1/2.0) 4:3 Diagonal 7.92 mm (Type 1/2.0) 5:4 Diagonal 8.51 mm (Type 1/1.9) 16:9 Diagonal 9.33 mm (Type 1/1.7) 12M Diagonal 8.61 mm (Type 1/1.9) 4K Number of effective pixels 4072 (H) × 3046 (V) approx....