IMX183CLK-J/CQJ-J Diagonal 15.86 mm (Type 1) Approx. 20.48M-Effective Pixel Monochrome/Color CMOS Image Sensor High-Speed and High-Picture-Quality Rolling Shutter-Type Back-Illuminated CMOS Image Sensors with Multi Pixel In the industrial application field, needs are increasing for faster products with higher pixel counts and for rolling shutter functions. To meet these needs, Sony Semiconductor Solutions Corporation has developed both color (IMX183CQJ-J) and monochrome (IMX183CLK-J) products uses a high sensitivity back-illuminated structure 2.4 μm square unit pixel. The optical size is Type 1 to enable use of a C-mount lens. In addition, these products are equipped with a variety of functions such as 4K video mode, a global reset function and a vertical arbitrary cropping function. 20.48M-pixel readout at 21.98 frame/s in 12-bit mode a global reset function 4K video mode (4096H × 2160V, 10-bit mode, 59.94 frame/s) a variety of readout modes such as 10-bit high-speed all-pixel readout, 12-bit high-resolution readout, and vertical arbitrary cropping back-illuminated structure 2.4 μm square unit pixel with a proven record in products for security camera and industrial applications Supports 20.48M-pixel readout at 21.98 frame/s in 12-bit mode High-resolution 12-bit digital output of the signals for 20.48M pixels (aspect ratio 3:2) realizes high-speed readout at 21.98 frame/s. This image sensor enables even higher resolution imaging of finer objects at high frame rates in excess of 20 frame/s, while still maintaining high picture quality. Supports 4K video mode (4096H × 2160V, 10-bit mode, 59.94 frame/s) 10-bit digital output of the signals for approx. 9.03M-effective pixels (aspect ratio approx. 17:9) realizes high-speed output at 59.94 frame/s and also enables video imaging. Supports various readout modes The IMX183CQJ-J/CLK-J series supports various readout modes including the above-noted high-resolution 12-bit all-pixel output, 10-bit all-pixel output that enables even faster readout, and high-speed 4K video output, as well as vertical arbitrary cropping output mode (cropping size restrictions apply) and a high-speed readout mode that uses the binning function (Table 3). High-sensitivity back-illuminated structure 2.4 μm square unit pixel with a proven record in products for security camera and industrial applications The IMX183CQJ-J/CLK-J series uses a high-sensitivity back-illuminated structure 2.4 μm square unit pixel with a proven record in the IMX178LLJ/LQJ*1 (for security camera and industrial applications). *1: For details on the IMX178LQJ series, see the New Product information released in S

＜Photograph 1＞ Sample Images Condition: 2000 lx F4.0 (ADC 12-bit mode , internal gain 0 dB) ＜Table 1＞ Device Structure Item Output image size Diagonal 15.86 mm (Type 1) aspect ratio 3:2 Number of effective pixels Unit cell size Front: 48 pixels, rear: 0 pixels Front: 16 pixels, rear: 0 pixels Optical blacks Input drive frequency Output Interface *1 Sensor slave mode only. ＜Table 2＞ Image Sensor Characteristics Item Sensitivity (monochrome) Saturation signal ＜Table 3＞ Basic Drive Mode Drive mode Recommended number of recording pixels Frame rate [frame/s] Vertical Arbitrary Cropping (10 bit) *2...