Ultra-High Linearity SPDT Switch CXM3630UR Description The CXM3630UR is a high power and ultra-high linearity SPDT switch for wireless communication systems. The CXM3630UR can be used for SVLTE and carrier aggregation requiring very high linearity. This IC has a 1.8 V CMOS compatible decoder. The Sony GaAs junction gate pHEMT (JPHEMT) MMIC process is used for low insertion loss and ultra-high linearity. (Application: LTE/CDMA/GSM/UMTS Handsets and mini base-stations) Features ◆ Very Low Insertion loss: 0.18 dB (Typ.) (Cellular Band ) 0.28 dB (Typ.) (IMT2000 ) ◆ Ultra-high linearity: IMD3 = –104 dBm (Max.), IIP3 = 82 dBm (Min.) at LTE Band 13, PTx = +23 dBm, PBlocker = +14 dBm ◆ High Isolation: 35 dB (Min.) (Cellular Band ) 23 dB (Min.) (IMT2000 ) ◆ Low voltage operation: VDD = 2.5 V ◆ No DC blocking capacitors required on RF ports ◆ 1 control input ◆ Small package size: UQFN-12 pin (2.0 mm × 2.0 mm) ◆ Lead-Free and RoHS compliant Structure GaAs JPHEMT MMIC switch, CMOS decoder Moisture Sensitivity Moisture Sensitivity Level for this part is MSL = 2 Absolute Maximum Ratings ♦ Bias voltage ♦ Maximum input power ♦ Operating temperature

This IC is ESD sensitive device. Special handling precautions are required. Block Diagram SPDT Antenna Switch MMIC Switch Active path

DC Bias Condition Parameter

Electrical Characteristics (Ta = 25 °C, VDD = 2.5 V, Vctl = 0/1.8 V) Item All ports in active paths Insertion loss IMD2 Inter modulation distortion in Rx Band Switching speed Wakeup time Control current Supply current Electrical characteristics are measured with all RF ports terminated in 50 Ω. *1 *2 *3 *4 *5 *6 *7 *8 *9 *10 Pin = 25 dBm, 704 to 787 MHz (Band 13, Band 17) Pin = 26 dBm, 824 to 960 MHz (Band 5, Band 8) Pin = 26 dBm, 1710 to 1990 MHz (Band 1 Tx, Band 2 Tx, Band 3 Tx, Band 4 Tx) Pin = 10 dBm, 2110 to 2170 MHz (Band 1 Rx, Band 4 Rx) Pin = 26 dBm, 2500 to 2690 MHz (Band 7) Pin = 35...

Triple Beat Ratio (VDD = 2.5 V, Ta = 25 °C) Condition Item Triple beat ratio Triple beat product at RF* [MHz] * Electrical characteristics are measured with all RF ports terminated in 50 Ω. Measured with the recommended circuit. * Electrical characteristics are measured with all RF ports terminated in 50 Ω. Measured with the recommended circuit.

Recommended Circuit *1 No DC blocking capacitors are required on all RF ports. (Except sourcing DC bias) *2 The DC levels of all RF ports are GND. *3 L1 (27 nH) and C1(12 pF) are recommended on Ant port for ESD protection. *4 C2(100 pF) is recommended on VDD pin for Decoupling Capacitor.

Recommended Land Pattern

tmhf* (Max-it?) i2! CfcSS* (Maxzt*! tKlt*. 2 > TYPE NO. [ l*AX 2 CHA^ACTEKS i IN SECTION C_ {FOR MORE THAN ? CHARACTERS FOLLOW RULES F3R AF^^HEV I ATI QMS. )

A YEAR CQDE IN SECTION _ 21 TYPE HO, ( WAX 1 CHARACTERS I IH SECTION C,_ <FOft HORE THAN 2 CHARACTERS FPL LOW RULES FOR AS B R E V I AT I 0 H3< )

8M WIDTH EMBOSSED TAPING MATERIAL:POLYSTYRENE CONTAINING CAROON (ANTISTATIC! *INTRODUCT ION OF REUSE REEL (IEEL THAT IS USED AGAIN AFTER COL LECTI ON I IE OSE THE REUSE REEL OF JEITA SPECIFICATION.

8m WIDTH EMBOSSED TAPING HATEllALWLISTTREIIf CONTAINING CARBON [ANTI STATIC! (REEL THAT IS USED AGAIN AFTER COLLECTION] HE USE THE REUSE HEEL OF JEITA SPECIFICATION.

Note Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.