Inspection System For Non-Contact Ultrasonic Testing Nondestructive Testing

The Principle of Air-Coupled Ultrasonic Testing → New challenges for testing lightweight components where conventional methods cannot be used and contamination with couplant is not desirable → Air-Coupled Ultrasound Testing (ACUT) allows contact-free testing without the use of additional coupling fluids → Send-receive configuration with the test item in between 2 transducers placed opposite to each other → The sound attenuation between sender and receiver is evaluated at a specific point (point measurement) → By taking multiple measurements and moving the transducers it is possible to scan a...

C-Scans with Transmission Test Method Honeycomb Composite with CFRP Layers Types of defects: impact damage and delaminated top layer Probe: CFC230-D25-P50 Ceramics Types of defects: delamination and density fluctuations before and after the sintering process Probes: CF075 and CF125 Battery Types of defects: air pockets and electrolyte distribution Probes: CF400 Piezo-Ceramic Probes Robust and Wear-Free Narrowband Very high sensitivity Size of the transducer and therefore also the acoustic field geometry is dependent on the nominal frequency CFC Series Latest piezocomposite technology Broadband...

SONOAIR® Components Air-coupled Probes Maximum resolution and highest sensitivity due to state-of-the-art SONOTEC piezo-composite technology incl. element focusing Up to 4 Channels Up to 4 independent transmitter and receiver channels with configurable square-wave burst pulser and low-noise pre-amplifiers High End Laboratory Electronics High performance pulserreceiver system Software Laboratory friendly software for basic measurement and advanced analysis capabilities

Technology Leader Experts throughout the entire measurement chain, including electronics, sensor technology, and composite technology. Sensor Technology → Latest composite technology enables high bandwidths at high sensitivities → Sound field shaping through classical methods, such as shaping of the transducer element or electronic methods by utilizing multi-element technology → Wide range of air-coupled ultrasonic testing probes Electronics → Configurable rectangular transmitter with voltages up to 800V → Ultra-low noise receiver with a system noise of less than 1nV/√Hz at a gain of up to 120dB...

Technical Data of the Standard Laboratory System General Data Scanner (Standard) PC with Windows operating system and software; 14-bits digitizer, 100 MB/s; Ultrasonic pulser unit; Ultrasonic receiver unit Operating Temperature Network Interface Protection Class Intuitive and clear graphical user interface 500 mm x 500 mm x 160 mm (Other scanners on request) Positioning Accuracy Scan Increment Separate windows for hardware parametrization (transmitter, receiver, scanner) Pulser Customizable screen layout Repositioning of the gates after the measurement Pulse Height Display of the measurement...