• Microprocessor Controlled
• Weld Cycle Counter
• Automatic Frequency Tuning
• Soft Start Overload Protection Circuitry
• Digital Amplitude Control
• Load Regulation Circuitry
• Digital Stack Wattage Display
• PLC I/O Interface Connection
• Digital Stack Frequency Display

Sonics’ MX Series power supplies are available in two versions: a low profile model for 1500 and 2500 watt units, and a high profile model for 4000 watt units. These power supplies are part of the 20 kHz ultrasonic seam welding systems, which include a welder and a power supply.

• MXC Remote Impulse and Continuous Duty Actuation
• Power Levels: 1500 Watts, 2500 Watts, 4000 Watts Peak Power

• Rigid Dual Cross Roller Bearing Stack Housing
• Compact System Profile
• Steel Ultrasonic Rotary Horn
• Weld Wheels in Various Widths and Knurl Patterns
• Zero Contact and Frictionless Rotary Commutator
• Weld Speeds up to 80 Feet (25 Meters) per Minute
• High Efficiency Air Vented Ultrasonic Converter
• Single Piece, Dual Nodal Mount Horn and Booster Stack

• Foot Pedal Switch with Emergency Stop
• Secondary Booster: Aluminum or Titanium

• Actuator Data: MSW20 Seam Welder Weight: 25 Lbs. (11.3 kg)
• MSWA20 Vertical Actuator Weight: 55 Lbs. (24.9 kg)
• MSWA20RA Vertical Actuator with Rotary Anvil and Plate Weight: 70 Lbs. (31.7 kg)
• MSWA20ST12 Vertical Actuator with Motorized Slide Table Weight: 80 Lbs. (36.2 kg)
• Pneumatic Requirement: 80 PSI Clean and Dry Air Service

• Low Profile Power Supply Data: Peak Output Power: 1500 Watts (1.5 kW) or 2500 Watts (2.5 kW)
• Power Supply Weight: 21 Lbs. (9.5 kg)
• Dimensions: 15.2" (386 mm) Wide x 7.0" (178 mm) High x 18.7" (476 mm) Deep
• Power Requirement: 220 VAC Single Phase

• High Profile Power Supply Data: Peak Output Power: 4000 Watts (4.0 kW)
• Power Supply Weight: 70 Lbs. (31.7 kg)
• Dimensions: 17.6" (447 mm) Wide x 10.7" (272 mm) High x 22.5" (571 mm) Deep
• Power Requirement: 220 VAC Single Phase