*mydirectindustry

Catalogs
Sonics + Materials, Inc.
ultrasonic seam welding systems

ultrasonic seam welding systems

1 / 2 PagesView full catalog

ultrasonic seam welding systems

Product catalog summary

Power Supply Features

Microprocessor Controlled
Weld Cycle Counter
Automatic Frequency Tuning
Soft Start Overload Protection Circuitry
Digital Amplitude Control
Load Regulation Circuitry
Digital Stack Wattage Display
PLC I/O Interface Connection
Digital Stack Frequency Display

Ultrasonic Seam Welding Systems

Sonics’ MX Series power supplies are available in two versions: a low profile model for 1500 and 2500 watt units, and a high profile model for 4000 watt units. These systems include a welder and a power supply.

Actuators

MSW20 Seam Welder
MSWA20 Vertical Actuator
MSWA20RA Vertical Actuator with Rotary Anvil and Plate
MSWA20ST12 Vertical Actuator with Motorized Slide Table and Plate

Additional Features

Rigid Dual Cross Roller Bearing Stack Housing
Compact System Profile
Steel Ultrasonic Rotary Horn with Replaceable Tip
Weld Wheels in Various Widths and Knurl Patterns
Zero Contact and Frictionless Rotary Commutator
Weld Speeds of up to 80 Feet (25 Meters) per Minute
High Efficiency Air Vented Ultrasonic Converter
Single Piece, Dual Nodal Mount Horn and Booster Stack

System Options

Foot Pedal Switch with Emergency Stop
Secondary Booster: Aluminum or Titanium

Specifications

Actuator Data: MSW20 Seam Welder Weight: 25 Lbs. (11.3 kg)
MSWA20 Vertical Actuator Weight: 55 Lbs. (24.9 kg)
MSWA20RA Vertical Actuator with Rotary Anvil and Plate Weight: 70 Lbs. (31.7 kg)
MSWA20ST12 Vertical Actuator with Motorized Slide Table Weight: 80 Lbs. (36.2 kg)
Pneumatic Requirement: 80 PSI Clean and Dry Air Service

Low Profile Power Supply Data

Peak Output Power: 1500 Watts (1.5 kW) or 2500 Watts (2.5 kW)
Power Supply Weight: 21 Lbs. (9.5 kg)
Power Supply Dimensions: 15.2" (386 mm) Wide x 7.0" (178 mm) High x 18.7" (476 mm) Deep
Power Requirement: 220 VAC Single Phase

High Profile Power Supply Data

Peak Output Power: 4000 Watts (4.0 kW)
Power Supply Weight: 70 Lbs. (31.7 kg)
Power Supply Dimensions: 17.6" (447 mm) Wide x 10.7" (272 mm) High x 22.5" (571 mm) Deep
Power Requirement: 220 VAC Single Phase

Catalog excerpts

ultrasonic seam welding systemsACTUATORS Sonics’ 20 kHz ultrasonic seam welding systems consist of a welder (available as a stand-alone unit or with an actuator, per the models shown above) and a power supply as shown below. Sonics’ MX Series power supplies are available in 2 versions: a low profile model for 1500 and 2500 watt units, and a high profile model for 4000 watt units. The features of the models are noted below. POWER SUPPLIES MODELS MXC Remote Impulse and Continuous Duty Actuation POWER LEVELS • 1500 Watts Peak Power • 2500 Watts Peak Power • 4000 Watts Peak Power POWER SUPPLY FEATURES ■ Microprocessor Controlled ■ Weld Cycle Counter ■ Automatic Frequency Tuning ■ Soft Start Overload Protection Circuitry ■ Digital Amplitude Control ■ Load Regulation Circuitry ■ Digital Stack Wattage Display ■ PLC I/O Interface Connection ■ Digital Stack Frequency Display Innovating since for more information: 1-800-745-1105 WWW.SOnicS.com

Open the catalog to page 1

system options Foot Pedal Switch with Emergency Stop 2.0" (51 mm) Typical Secondary Booster: Aluminum or Titanium Secondary Booster specifications additional features • Rigid Dual Cross Roller Bearing Stack Housing • Most Compact System Profile in the Industry • Steel Ultrasonic Rotary Horn with Replaceable Tip • Weld Wheels in Various Widths and Knurl Patterns • Zero Contact and Frictionless Rotary Commutator • Weld Speeds of up to 80 Feet (25 Meters) per Minute • High Efficiency Air Vented Ultrasonic Converter • Single Piece, Dual Nodal Mount Horn and Booster Stack Actuator Data: MSW20 Seam...

Open the catalog to page 2

All Sonics + Materials, Inc. catalogs and technical brochures

Archived catalogs

POWER SUPPLIES
1 Page
Power Supplies_2008
2 Pages