RPR-CONTROL 100
4Pages

{{requestButtons}}

Catalog excerpts

RPR-CONTROL 100 - 1

Competence in pump and filter technologies RPR Control-100 is the efficient monitoring system for centrifugal pumps. RPR Control-100 Electronic process monitoring system

Open the catalog to page 1
RPR-CONTROL 100 - 2

For process-related reasons, it is impossible to entirely avoid critical operating conditions with many pump applications. And on top of that, more and more installations are being operated with less and less personnel, due to pressure from rising costs. For smooth functioning though, the reliably automated monitoring of pump processes is a must. And the new RPR Control-100 series Sondermann’s RPR Control-100 for electronic process monitoring of pumps. The active-power meter integrated to the RPR Control-100 system has 4 user-programmable switching thresholds assigned to the following...

Open the catalog to page 2
RPR-CONTROL 100 - 3

Principle of measuring the electric power required The least power is required when the pump is running dry or when there is only little fluid in the pump housing. A little bit more power is required when the pump overheats or runs with the pressure line closed or delivers at a rate of zero or slightly above. With increasing delivery rate, the pump reaches its normal operating range and the power required increases accordingly. The top end of the operating range is limited by the overload threshold that is either characterised by the maximum power of the motor or the maximum volume flow...

Open the catalog to page 3
RPR-CONTROL 100 - 4

Sondermann Pumpen + Filter GmbH & Co. KG August-Horch-Straße 4, D-51149 Cologne Tel. +49.2203.9394-0 Fax +49.2203.9394-48 info@sondermann-pumpen.de www.sondermann-pumpen.de We will be glad to help you. Just call your personal consultant: +49.2203.9394-0 Or send an e-mail: rpr-control@sondermann-pumpen.de S-RPR 04/09 – 3E If one of these switching thresholds is reached, the RPR Control-100 transmits a signal to the overall controller. At the same time, the LED display at the monitor signals the error condition to the operating personnel. be used as an on-site operator element. The portable...

Open the catalog to page 4

All SONDERMANN PUMPEN + FILTER GMBH & Co. KG catalogs and technical brochures

  1. MAGSON MA/MM

    32 Pages

  2. MA type 4/4H

    2 Pages

  3. MM type 5

    2 Pages

  4. MM type 4

    2 Pages

  5. MM type 3

    2 Pages

  6. MM type 2

    2 Pages

  7. MM type 1

    2 Pages

  8. MAGSON-MM

    20 Pages

  9. MAGSON MAU

    8 Pages

  10. MA type 7

    2 Pages

  11. MA type 6/6H

    2 Pages

  12. MA type 5/5H

    2 Pages

  13. MA type 4/4H

    2 Pages